×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2004 Toyota Sienna Differential Seal
- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Differential Seals found
2004 Toyota Sienna Pinion Seal, Rear
Part Number: 41214-20020$15.05 MSRP: $20.95You Save: $5.90 (29%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Slinger, Drive Pinion; Differential Drive Pinion Oil Deflector, Rear; Differential Seal; Axle Seal; Oil Slinger; Slinger; Slinger, Front Differential Drive Pinion Oil; Slinger, Rear Differential Drive Pinion Oil
- Position: Rear
- Replaces: 41214-20010
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.9 x 2.8 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 41214-20020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2004 Toyota Sienna Seal, Oil (For Rear Differential Carrier)
Part Number: 90311-38068$11.46 MSRP: $15.95You Save: $4.49 (29%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Seal, Type T Oil; Differential Pinion Seal; Differential Seal; Axle Seal
- Position: Rear
- Replaces: 90311-38019, 90311-38027, 90311-38052, 90311-38048
- Part Name Code: 41201C
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.0 x 3.0 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90311-38068
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2004 Toyota Sienna Pinion Seal
Part Number: 41214-28010$6.92 MSRP: $9.63You Save: $2.71 (29%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Slinger, Drive Pinion; Differential Seal; Axle Seal; Oil Slinger; Slinger, Rear Differential Drive Pinion Oil
- Manufacturer Note: TYPE B:REFER ILLUST.
- Part Name Code: 41214
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.8 x 2.8 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 41214-28010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2004 Toyota Sienna Differential Seal
Looking for affordable OEM 2004 Toyota Sienna Differential Seal? Explore our comprehensive catalogue of genuine 2004 Toyota Sienna Differential Seal. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2004 Toyota Sienna Differential Seal Parts Q&A
- Q: How to replace a Differential Seal in the front differential oil seal (U151E) on 2004 Toyota Sienna?A: The first step in front differential oil seal (U151E) replacement requires wheel removal together with engine under cover No.1. Drain the automatic transaxle fluid through the drain plug removal process before reinstalling a new gasket along with the drain plug and torquing it to 49 Nm (500 kgf-cm, 36 ft. lbs.). The following service requires removal of front drive shaft assemblies from both right-hand and left-hand sides before using special service tool: 09308-00010 to extract the transaxle housing oil seal. The same tool enables removal of the differential side bearing retainer oil seal. Use special service tool: 09316-60011 (09316-00011) and a hammer to install the new transaxle housing oil seal with a drive-in depth between 0 plus or minus 0.5 mm (0 plus or minus 0.020 inch) while applying MP grease to the lip. Apply this sequence to fit the differential side bearing retainer oil seal using special service tool: 09223-15020, 09950-70010 (09951-07150) and a hammer by maintaining similar drive-in depth while applying grease. The front drive shaft assembly LH and RH assembly must be reinstalled first and then the front wheels should be installed before torque application to 103 Nm (1,050 kgf-cm, 76 ft. lbs.). Perform and check the fluid level of the automatic transaxle before reinstalling engine under cover No.1. Perform a signal inspection of the ABS speed sensor both for ABS with EBD system and ABS with EBD & BA & TRAC VSC & system.