How to replace the Air Bag Sensor Rear RH on 2004 Toyota Sienna?

A replacement of the Air Bag Sensor Rear RH requires safety precautions which start with disconnecting the battery negative terminal and waiting 90 seconds for work to begin. The first steps involve removing the rear door scuff plate on the right-hand side along with the rear door Weather Strip RH, back door Weather Strip, back door scuff plate, lap belt outer anchor cover rear No.2 seat, and quarter trim panel assy front RH. Start the installation by removing the air duct assembly through its screws then disconnect and unfasten the two bolts on the air bag sensor rear RH. Installation of the new air bag sensor rear RH requires that users switch off the ignition while also disconnecting the battery negative terminal. The sensor must be secured with 2 bolts reaching 17.5Nm of torque (178 kgf.cm, 13 ft.lbf) while correctly installing the sensor connector which should avoid any contact with SRS wiring. The inspection of the SRS warning light will verify proper system functioning. The air bag sensor rear RH needs replacement with a new part when there are visible damages including cracks or dents present.

OEM 2004 Toyota Sienna Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Air Bag Sensors found

View related parts
2004 Toyota Sienna Position Sensor, Passenger Side
Part Number: 89178-06020
$79.24 MSRP: $111.22
You Save: $31.98 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Seat Position; Seat Track Position Sensor, Left, Right; Air Bag Sensor; Occupant Sensor; Seat; Sensor, Seat Position Air Bag
- Position: Passenger Side
- Part Name Code: 89178A
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.1 x 1.6 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89178-06020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Sienna Submodels:
- CE, LE, XLE, XLE Limited | 6 Cyl 3.3 L GAS
View related parts
2004 Toyota Sienna Front Impact Sensor
Part Number: 89173-09100
$98.11 MSRP: $118.29
You Save: $20.18 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Bag, Front; Air Bag Impact Sensor; Air Bag Sensor; Front Sensor; Sensor, Air Bag, Front Passenger Side; Sensor, Air Bag, Front Driver Side
- Position: Front
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.8 x 3.0 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89173-09100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
2004 Toyota Sienna Side Impact Sensor, Passenger Side
Part Number: 89860-08020
$225.61 MSRP: $276.69
You Save: $51.08 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Side Air Bag; Air Bag Impact Sensor, Front Right; Air Bag Sensor; Side Sensor; Sensor Assembly, Side Air Bag, Passenger Side
- Position: Passenger Side
- Part Name Code: 89860
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.2 x 2.6 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89860-08020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Sienna Submodels:
- CE, LE, XLE, XLE Limited | 6 Cyl 3.3 L GAS
View related parts
2004 Toyota Sienna Side Impact Sensor, Driver Side
Part Number: 89830-08010
$225.61 MSRP: $276.69
You Save: $51.08 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Side Air Bag; Air Bag Impact Sensor, Front Left; Air Bag Sensor; Side Sensor; Sensor Assembly, Side Air Bag, Driver Side
- Position: Driver Side
- Part Name Code: 89860A
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.3 x 2.6 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89830-08010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Sienna Submodels:
- CE, LE, XLE, XLE Limited | 6 Cyl 3.3 L GAS
View related parts
2004 Toyota Sienna Rear Sensor
Part Number: 89833-08010
$282.82 MSRP: $403.80
You Save: $120.98 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Bag, Rear; Air Bag Impact Sensor, Rear; Air Bag Sensor; Side Sensor; Sensor, Air Bag, Rear Passenger Side; Sensor, Air Bag, Rear Driver Side
- Position: Rear
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.3 x 2.6 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89833-08010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Sienna Submodels:
- CE, LE, XLE, XLE Limited | 6 Cyl 3.3 L GAS

2004 Toyota Sienna Air Bag Sensor

Looking for affordable OEM 2004 Toyota Sienna Air Bag Sensor? Explore our comprehensive catalogue of genuine 2004 Toyota Sienna Air Bag Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2004 Toyota Sienna Parts Questions & Experts Answers

Q: How to replace the Air Bag Sensor Rear RH on 2004 Toyota Sienna?
A: A replacement of the Air Bag Sensor Rear RH requires safety precautions which start with disconnecting the battery negative terminal and waiting 90 seconds for work to begin. The first steps involve removing the rear door scuff plate on the right-hand side along with the rear door Weather Strip RH, back door Weather Strip, back door scuff plate, lap belt outer anchor cover rear No.2 seat, and quarter trim panel assy front RH. Start the installation by removing the air duct assembly through its screws then disconnect and unfasten the two bolts on the air bag sensor rear RH. Installation of the new air bag sensor rear RH requires that users switch off the ignition while also disconnecting the battery negative terminal. The sensor must be secured with 2 bolts reaching 17.5Nm of torque (178 kgf.cm, 13 ft.lbf) while correctly installing the sensor connector which should avoid any contact with SRS wiring. The inspection of the SRS warning light will verify proper system functioning. The air bag sensor rear RH needs replacement with a new part when there are visible damages including cracks or dents present.