How to service and repair the Brake Master Cylinder on 2004 Toyota Sequoia?

The first step to work on the Brake Master Cylinder starts with reservoir removal through set screw removal and gentle extraction where 1.5 Nm (15 kgf-cm, 13 inch lbs) torque is necessary. Separate the reservoir strainer and cap followed by the removal of two grommets together with a seal and two master cylinder pressure sensors using 25 Nm torque. The reassembly process consists of putting parts together in the opposite order of disassembly while applying lithium soap base glycol grease to the rubber parts which are marked by arrows.

OEM 2004 Toyota Sequoia Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Master Cylinder found

View related parts
2004 Toyota Sequoia Master Cylinder
Part Number: 47201-0C041
$478.05 MSRP: $700.59
You Save: $222.54 (32%)
Product Specifications
- Other Name: Cylinder Sub-Assembly, Brake Stroke Simulator; Brake Master Cylinder; Brake Reservoir; Cylinder Sub-Assembly, Brake Master
- Replaces: 47201-0C040
- Part Name Code: 47201
- Item Weight: 2.40 Pounds
- Item Dimensions: 10.3 x 10.2 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 47201-0C041
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS

2004 Toyota Sequoia Brake Master Cylinder

Looking for affordable OEM 2004 Toyota Sequoia Brake Master Cylinder? Explore our comprehensive catalogue of genuine 2004 Toyota Sequoia Brake Master Cylinder. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2004 Toyota Sequoia Parts Questions & Experts Answers

Q: How to service and repair the Brake Master Cylinder on 2004 Toyota Sequoia?
A: The first step to work on the Brake Master Cylinder starts with reservoir removal through set screw removal and gentle extraction where 1.5 Nm (15 kgf-cm, 13 inch lbs) torque is necessary. Separate the reservoir strainer and cap followed by the removal of two grommets together with a seal and two master cylinder pressure sensors using 25 Nm torque. The reassembly process consists of putting parts together in the opposite order of disassembly while applying lithium soap base glycol grease to the rubber parts which are marked by arrows.