How to Service and Repair a Brake Caliper on 2004 Toyota MR2 Spyder?

The brake caliper should be removed by removing the set ring and cylinder boot followed by the compression of air to push out the piston. Take off piston seal and bleeder plug. Check pad lining and disc thickness and change them when they are below the standard requirements. Check runout of measure disc and adjust. Then assemble backwards, greasing the designated areas.

OEM 2004 Toyota MR2 Spyder Brake Caliper

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Calipers found

View related parts
2004 Toyota MR2 Spyder Caliper Assembly, Rear Driver Side
Part Number: 47750-17160
$205.26 MSRP: $293.07
You Save: $87.81 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly, Disc; Disc Brake Caliper, Rear Left; Caliper; Cylinder Assembly, Disc Brake, Rear Driver Side; Brake Caliper
- Position: Rear Driver Side
- Part Name Code: 47750A
- Item Weight: 8.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 47750-17160
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota MR2 Spyder Submodels:
- Base | 4 Cyl 1.8 L GAS
View related parts
2004 Toyota MR2 Spyder Caliper Assembly, Passenger Side
Part Number: 47730-17160
$205.26 MSRP: $293.07
You Save: $87.81 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly, Disc; Disc Brake Caliper, Rear Right; Caliper; Cylinder Assembly, Rear Disc Brake, Passenger Side; Brake Caliper
- Position: Passenger Side
- Part Name Code: 47730B
- Item Weight: 8.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 47730-17160
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota MR2 Spyder Submodels:
- Base | 4 Cyl 1.8 L GAS
View related parts
2004 Toyota MR2 Spyder Caliper Assembly, Driver Side
Part Number: 47750-17150
$189.53 MSRP: $270.61
You Save: $81.08 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly, Disc; Disc Brake Caliper, Front Left; Caliper; Cylinder Assembly, Disc Brake, Driver Side; Brake Caliper
- Position: Driver Side
- Part Name Code: 47750
- Item Weight: 12.10 Pounds
- Item Dimensions: 10.1 x 7.8 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 47750-17150
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota MR2 Spyder Submodels:
- Base | 4 Cyl 1.8 L GAS
View related parts
2004 Toyota MR2 Spyder Caliper Assembly, Passenger Side
Part Number: 47730-17150
$189.53 MSRP: $270.61
You Save: $81.08 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly, Disc; Disc Brake Caliper, Front Right; Caliper; Cylinder Assembly, Front Disc Brake, Passenger Side; Brake Caliper
- Position: Passenger Side
- Part Name Code: 47730
- Item Weight: 12.00 Pounds
- Item Dimensions: 10.2 x 7.5 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 47730-17150
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota MR2 Spyder Submodels:
- Base | 4 Cyl 1.8 L GAS

2004 Toyota MR2 Spyder Brake Caliper

Looking for affordable OEM 2004 Toyota MR2 Spyder Brake Caliper? Explore our comprehensive catalogue of genuine 2004 Toyota MR2 Spyder Brake Caliper. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2004 Toyota MR2 Spyder Brake Caliper Parts Q&A

Q: How to Service and Repair a Brake Caliper on 2004 Toyota MR2 Spyder?
A: The brake caliper should be removed by removing the set ring and cylinder boot followed by the compression of air to push out the piston. Take off piston seal and bleeder plug. Check pad lining and disc thickness and change them when they are below the standard requirements. Check runout of measure disc and adjust. Then assemble backwards, greasing the designated areas.