Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2000-2002 Toyota MR2 Spyder | Base | 4 Cyl 1.8 L GAS
Toyota MR2 Spyder Brake Caliper
If you're thinking about purchasing OEM parts for your Toyota MR2 Spyder, our website is your one-stop destination. We stock an extensive selection of genuine Toyota MR2 Spyder Brake Caliper at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.
Q: How to service and repair the brake caliper on Toyota MR2 Spyder?
A: To maintain brake caliper, take away the rear wheel and attach the disc by hub nuts at 103 Nm. Unattach the parking brake cable and the flexible hose and put them in a container brake fluid. Take out caliper and pads and replace them by following the same procedure reversing the steps, filling the reservoir and bleeding the system.
Q: How to Service and Repair a Brake Caliper on Toyota MR2 Spyder?
A: To maintain the brake caliper, dismantle it by removing dust boot, sliding bushing and main pin boot. Pull the piston and seals out with special tools and disassemble the adjusting bolt assembly. Check the disc runout, and reassemble all parts, with due regard to torque and clearance.