Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm, Front Left; Control Arm Assembly; Arm Sub-Assembly, Front Suspension, Lower Driver Side; Suspension Control Arm; Control Arm
Position: Lower Driver Side
Part Name Code: 48069
Item Weight: 7.60 Pounds
Item Dimensions: 19.7 x 3.3 x 15.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 48069-07030
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm; Control Arm Assembly; Control Arm; Arm Sub-Assembly, Front Suspension, Lower Passenger Side
Position: Passenger Side
Part Name Code: 48068
Item Weight: 8.10 Pounds
Item Dimensions: 19.3 x 3.2 x 15.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 48068-07030
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2004 Toyota Avalon Submodels:
XL, XLS | 6 Cyl 3.0 L GAS
2004 Toyota Avalon Control Arm
Looking for affordable OEM 2004 Toyota Avalon Control Arm? Explore our comprehensive catalogue of genuine 2004 Toyota Avalon Control Arm. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2004 Toyota Avalon Parts Questions & Experts Answers
Q: How to service and repair the front control arm on 2004 Toyota Avalon?
A: Service or repair work on the front control arm begins with front wheel removal while applying 103 Nm torque which corresponds to 1,050 kgf-cm or 76 ft. lbs. torque. The uninstallation of the lower suspension arm from its lower ball joint requires removal of 2 nuts and bolt with tightening torque set at 127 Nm (1,300 kgf-cm, 94 ft. lbs.). The lower suspension arm becomes removable after separating the front side bolts with 206 Nm (2,100 kgf-cm, 152 ft. lbs.) torque followed by taking off the rear side bolt and nut with the same torque value until the arm and bushing stopper can be extracted. To replace the bushing technicians must employ Special Service Tool: 09649-17010, 09710-04081 with a steel plate and press to remove the old bushing before installing the new bushing using Special Service Tool: 09238-47012, 09649-17010 together with a press for correct orientation. The procedure for installation needs to follow the exact opposite steps of removal until you complete the front wheel alignment check.