How to replace the front seat belt components on 2003 Toyota Matrix?

The first operation when replacing front seat belt components should include disconnecting the negative terminal of the battery. Start by disconnecting the front seat assembly RH before taking off the front seat inner belt assembly RH through removal of the bolt. The next step involves removing the front and rear door scuff plates RH followed by stripping the front and rear door opening trims RH as well as the center pillar garnish lower RH. Start the procedure of removing the seat belt with its pretensioner at least 90 seconds after battery disconnect and ignition shutdown. Then remove the front seat outer belt assembly RH. Study all caution notices which pertain to the pretensioner integrated in the SRS Air Bag system. Use a screwdriver on the shoulder anchor cover then tape its tip before uninstalling the shoulder anchor bolt to disconnect the outer belt from the front seat at the shoulder anchor point. A screwdriver will help detach the floor anchor cover before you remove the bolt to disconnect the front seat outer belt assembly RH at its floor anchor point. Unplug the pretensioner connector after removing the 2 bolts which allows you to take out the front seat outer belt assembly RH. The first step involves removing the bolt from the front shoulder belt anchor adjuster assembly as well as the center pillar garnish RH. The front shoulder belt anchor adjuster assembly needs the bolt installation while the torque value should be 41.2 N.m (420 kgf.cm, 30 ft.lbf). The installation of the front seat outer belt assembly RH starts by avoiding retractor disassembly while checking the proper locking of the tilt angle. To install the retractor fasten it with two bolts where the upper bolt must reach 4.9 N.m (50 kgf.cm, 43 in.lbf) torque setting and the lower bolt should get 41.2 N.m (420 kgf.cm, 30 ft.lbf). The shoulder anchor and bolt require 41.2 N.m torque before installing the shoulder anchor cover and floor anchor and bolt and installing their respective covers. Position the ELR lock and examine its functionality before attaching the bolt for the front seat inner belt assembly RH and torquing it to 41.2 N.m (420 kgf.cm, 30 ft.lbf).

OEM 2003 Toyota Matrix Seat Belt

Seat Safety Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Seat Belts found

View related parts
2003 Toyota Matrix Buckle, Driver Side
Part Number: 73240-01030-B0
$27.11 MSRP: $37.74
You Save: $10.63 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Assembly, Front Seat; Seat Belt Receptacle, Front Left; Latch; Belt Assembly, Front Seat Inner, Driver Side
- Manufacturer Note: DK.GRAY,TRIM13,14
- Position: Driver Side
- Part Name Code: 73240
- Item Weight: 1.00 Pounds
- Item Dimensions: 11.1 x 7.9 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73240-01030-B0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Matrix Submodels:
- Base, XR, XRS | 4 Cyl 1.8 L GAS
View related parts
2003 Toyota Matrix Buckle, Inner
Part Number: 73380-01040-B0
$26.16 MSRP: $36.41
You Save: $10.25 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Assembly, Rear Seat; Seat Belt Receptacle, Rear Right; Latch; Belt Assembly, Rear Seat, Inner
- Manufacturer Note: DK. GRAY,TRIM13,14
- Position: Inner
- Part Name Code: 73380A
- Item Weight: 1.10 Pounds
- Item Dimensions: 9.2 x 6.3 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73380-01040-B0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Matrix Submodels:
- Base, XR, XRS | 4 Cyl 1.8 L GAS
View related parts
2003 Toyota Matrix Lap & Shoulder Belt, Center
Part Number: 73350-01040-B2
$156.29 MSRP: $221.25
You Save: $64.96 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Assembly, Rear Seat L; Seat Belt Lap and Shoulder Belt, Rear Center; Center Belt Assembly; Belt Assembly, Rear Seat, Outer Center
- Manufacturer Note: DK. GRAY,TRIM13,14
- Position: Center
- Part Name Code: 73350C
- Item Weight: 3.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73350-01040-B2
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Matrix Submodels:
- Base, XR, XRS | 4 Cyl 1.8 L GAS
View related parts
2003 Toyota Matrix Buckle, Passenger Side
Part Number: 73230-01030-B0
$40.38 MSRP: $56.21
You Save: $15.83 (29%)
ADD TO CART
Product Specifications
- Other Name: Belt Assembly, Front Seat; Seat Belt Receptacle, Front Right; Latch; Belt Assembly, Front Seat Inner, Passenger Side
- Manufacturer Note: DK.GRAY,TRIM13,14
- Position: Passenger Side
- Part Name Code: 73230
- Item Weight: 1.00 Pounds
- Item Dimensions: 13.5 x 11.2 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73230-01030-B0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Matrix Submodels:
- Base, XR, XRS | 4 Cyl 1.8 L GAS
View related parts
2003 Toyota Matrix Lap & Shoulder Belt, Driver Side
Part Number: 73220-02131-B1
$256.06 MSRP: $365.59
You Save: $109.53 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Assembly, Front Seat; Seat Belt Lap and Shoulder Belt, Front Left, Left; Belt & Retractor; Belt Assembly, Front Seat Outer, Driver Side
- Position: Driver Side
- Replaces: 73220-02131-E0, 73220-02131-B0
- Part Name Code: 73220
- Item Weight: 4.10 Pounds
- Item Dimensions: 10.4 x 7.1 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73220-02131-B1
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Matrix Submodels:
- Base, XR, XRS | 4 Cyl 1.8 L GAS
View related parts
2003 Toyota Matrix Lap & Shoulder Belt, Passenger Side
Part Number: 73210-02141-B1
$256.06 MSRP: $365.59
You Save: $109.53 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Assembly, Front Seat; Seat Belt Lap and Shoulder Belt, Front Right, Right; Belt & Retractor; Belt Assembly, Front Seat Outer, Passenger Side
- Position: Passenger Side
- Replaces: 73210-02141-E0, 73210-02141-B0
- Part Name Code: 73210
- Item Weight: 3.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73210-02141-B1
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Matrix Submodels:
- Base, XR, XRS | 4 Cyl 1.8 L GAS
View related parts
2003 Toyota Matrix Lap & Shoulder Belt, Outer Passenger Side
Part Number: 73360-01100-B0
Product Specifications
- Other Name: Belt Assembly, Rear Seat; Seat Belt Lap and Shoulder Belt, Rear Right; Belt & Retractor; Belt Assembly, Rear Seat 3 Point Type, Outer Passenger Side
- Manufacturer Note: DK. GRAY,TRIM13,14
- Position: Outer Passenger Side
- Part Name Code: 73360
- Item Weight: 2.50 Pounds
- Item Dimensions: 12.4 x 11.1 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73360-01100-B0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Matrix Submodels:
- Base, XR, XRS | 4 Cyl 1.8 L GAS
View related parts
2003 Toyota Matrix Lap & Shoulder Belt, Outer Driver Side
Part Number: 73370-01100-B0
Product Specifications
- Other Name: Belt Assembly, Rear Seat; Seat Belt Lap and Shoulder Belt, Rear Left; Belt & Retractor; Belt Assembly, Rear Seat 3 Point Type, Outer Driver Side
- Manufacturer Note: DK. GRAY,TRIM13,14
- Position: Outer Driver Side
- Part Name Code: 73370
- Item Weight: 2.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73370-01100-B0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Matrix Submodels:
- Base, XR, XRS | 4 Cyl 1.8 L GAS
View related parts
2003 Toyota Matrix Buckle, Driver Side
Part Number: 73480-01030-B0
Product Specifications
- Other Name: Belt Assembly, Rear Seat I; Seat Belt Receptacle, Rear Left; Latch; Belt Assembly, Rear Seat Inner W/Center, Driver Side
- Manufacturer Note: DK. GRAY,TRIM13,14
- Position: Driver Side
- Part Name Code: 73480
- Item Weight: 2.40 Pounds
- Item Dimensions: 12.4 x 9.3 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73480-01030-B0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Matrix Submodels:
- Base, XR, XRS | 4 Cyl 1.8 L GAS

2003 Toyota Matrix Seat Belt

Looking for affordable OEM 2003 Toyota Matrix Seat Belt? Explore our comprehensive catalogue of genuine 2003 Toyota Matrix Seat Belt. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2003 Toyota Matrix Parts Questions & Experts Answers

Q: How to replace the front seat belt components on 2003 Toyota Matrix?
A: The first operation when replacing front seat belt components should include disconnecting the negative terminal of the battery. Start by disconnecting the front seat assembly RH before taking off the front seat inner belt assembly RH through removal of the bolt. The next step involves removing the front and rear door scuff plates RH followed by stripping the front and rear door opening trims RH as well as the center pillar garnish lower RH. Start the procedure of removing the seat belt with its pretensioner at least 90 seconds after battery disconnect and ignition shutdown. Then remove the front seat outer belt assembly RH. Study all caution notices which pertain to the pretensioner integrated in the SRS Air Bag system. Use a screwdriver on the shoulder anchor cover then tape its tip before uninstalling the shoulder anchor bolt to disconnect the outer belt from the front seat at the shoulder anchor point. A screwdriver will help detach the floor anchor cover before you remove the bolt to disconnect the front seat outer belt assembly RH at its floor anchor point. Unplug the pretensioner connector after removing the 2 bolts which allows you to take out the front seat outer belt assembly RH. The first step involves removing the bolt from the front shoulder belt anchor adjuster assembly as well as the center pillar garnish RH. The front shoulder belt anchor adjuster assembly needs the bolt installation while the torque value should be 41.2 N.m (420 kgf.cm, 30 ft.lbf). The installation of the front seat outer belt assembly RH starts by avoiding retractor disassembly while checking the proper locking of the tilt angle. To install the retractor fasten it with two bolts where the upper bolt must reach 4.9 N.m (50 kgf.cm, 43 in.lbf) torque setting and the lower bolt should get 41.2 N.m (420 kgf.cm, 30 ft.lbf). The shoulder anchor and bolt require 41.2 N.m torque before installing the shoulder anchor cover and floor anchor and bolt and installing their respective covers. Position the ELR lock and examine its functionality before attaching the bolt for the front seat inner belt assembly RH and torquing it to 41.2 N.m (420 kgf.cm, 30 ft.lbf).

Related 2003 Toyota Matrix Parts

Alternate Year Models

2004 Toyota Matrix Seat Belt