×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2003 Toyota Matrix ABS Control Module
Anti Lock Brake Control Module- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 ABS Control Modules found
2003 Toyota Matrix Modulator Valve
Part Number: 44050-01011$773.04 MSRP: $973.10You Save: $200.06 (21%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly
- Replaces: 44050-01010
- Part Name Code: 44510
- Item Weight: 4.90 Pounds
- Item Dimensions: 9.3 x 7.7 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-01011
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
- Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly
- Part Name Code: 44510
- Item Weight: 5.30 Pounds
- Item Dimensions: 9.1 x 7.9 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-01020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2003 Toyota Matrix ABS Control Module
Looking for affordable OEM 2003 Toyota Matrix ABS Control Module? Explore our comprehensive catalogue of genuine 2003 Toyota Matrix ABS Control Module. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2003 Toyota Matrix ABS Control Module Parts Q&A
- Q: How to replace the ABS Control Module for Antilock Brakes on 2003 Toyota Matrix?A: The first task in Hydraulic Control Assembly for Antilock Brakes replacement requires draining brake fluid with proper cleaning of any fluid that touches painted surfaces. First disconnect the front wheel on the right side along with the front fender liner from the right side. Disconnect the brake actuator by turning the latch of its connector and using Special Service Tool: 09023-00100 while tag marking all six brake tubes for future reinstallation. Detach the brake actuator with bracket by uninstalling the nut and two bolts. By taking away the three nuts the brake actuator disconnects from its bracket. The brake actuator assembly requires you to install the bracket to the actuator first by tightening 3 nuts to 4.7 Nm torque then installing the actuator-bracket assembly with a nut and two bolts that need to be torqued to 19 Nm capacity. Reinstall the brake actuator tubes to specified brake actuator positions using Special Service Tool: 09023-00100 while torquing them to 15.2 Nm (155 kgf-cm, 11 ft. lbs.) and then connect the brake actuator connector. Reinstall the front fender liner RH together with the right-hand front wheel while torquing the parts to 103 Nm (1,050 kgf-cm, 76 ft. lbs.). Proceed by filling the reservoir with brake fluid while using Special Service Tool: 09023-00100 to execute bleeding of both master cylinder and brake line before inspecting fluid reservoir levels and checking for brake fluid leaks followed by a hand-held tester verification of the brake actuator system.