How to replace the lower ball joint assembly front LH on 2003 Toyota Matrix?

To change the lower ball joint assembly front LH, lift the vehicle, remove the front wheel and disconnect the speed sensor. Discover the tie rod and suspension arm and after that, remove the ball joint assembly. Check and put the new assembly together and tighten the castle nut 103 Nm. Install the parts and test alignment and ABS signal.

OEM 2003 Toyota Matrix Ball Joint

Control Arm Joint

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ball Joint found

View related parts
2003 Toyota Matrix Lower Ball Joint
Part Number: 43330-09670
$57.23 MSRP: $79.65
You Save: $22.42 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint Set, Lower Ball; Suspension Ball Joint, Front; Joint Assembly, Lower Ball, Front Passenger Side; Front Driver Side; Suspension Ball Joint.
- Position: Lower
- Replaces: 43330-29425, 43330-09190
- Item Weight: 1.50 Pounds
- Item Dimensions: 5.4 x 3.2 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 43330-09670
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Matrix Submodels:
- Base, XR, XRS | 4 Cyl 1.8 L GAS

2003 Toyota Matrix Ball Joint

Looking for affordable OEM 2003 Toyota Matrix Ball Joint? Explore our comprehensive catalogue of genuine 2003 Toyota Matrix Ball Joint. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2003 Toyota Matrix Ball Joint Parts Q&A

Q: How to replace the lower ball joint assembly front LH on 2003 Toyota Matrix?
A: To change the lower ball joint assembly front LH, lift the vehicle, remove the front wheel and disconnect the speed sensor. Discover the tie rod and suspension arm and after that, remove the ball joint assembly. Check and put the new assembly together and tighten the castle nut 103 Nm. Install the parts and test alignment and ABS signal.