OEM 2003 Toyota Camry Antenna

2003 Toyota Camry Parts Questions & Experts Answers

• Q: How to replace the Navigation Antenna Assembly on 2003 Toyota Camry?

  A: The process of Navigation Antenna Assembly replacement begins with unmounting the luggage compartment floor mat followed by the spare wheel cover assembly and luggage compartment trim hook No.1 along with the rear floor finish plate and luggage compartment trim cover inner LH before taking away the rear seat cushion assembly and rear side seat back assemblies (both right-hand and left-hand for TMC and TMMK made). You need to take out the roof side garnish inner pieces from both LH and RH locations (available with and without curtain shield air bag) along with the room partition board assembly made by TMMK and the rear seat shoulder belt cover on the right side and the package tray trim panels from TMC and TMMK production sites. Both outer and inner components of the rear seat 3 point type belt assembly with its center belt assemblies must be removed from both RH and LH sides (TMC and TMMK made). Room partition boards LH and RH require removal next before handling the navigation antenna assembly which includes unconnecting the connector and tying string to the cable tip followed by screw removal and unclamping the two retaining points. Before adding the new navigation antenna assembly, remove the string from the connector then position it on the new unit utilizing the string to direct the cable through the luggage room and room side before applying protective tape to the connector tip to avoid damage. Use the provided screw while also applying two clamps to lock the navigation antenna assembly in place before connecting the component again. The repair process concludes by placing both RH and LH center belt assemblies and both outer belt assemblies for third-position rear seat and both Rh and LH seat back assemblies from TMC/TMMK production lines before installing rear seat back assemblies for both sides.