How to service and repair the A/C Clutch on 2002 Toyota Tacoma?

Begin compressor and magnetic clutch repair services after running the engine idle with A/C activated for ten minutes followed by engine stoppage to disconnect the negative (-) terminal cable from the battery. Discharge the system refrigerant before removing engine under cover and unfastening the suction and discharge hoses through 2 bolt removal steps alongside fitment of caps to stop system entry of moisture or dirt. Begin by first removing the compressor through fan shroud detachment followed by drive belt loosening and removing compressor mounting bolts. To remove the compressor bracket use four bolts for the 2RZ-FE and 3RZ-FE engine models but five bolts are required for the installation of the 5VZ-FE engine model. The installation process requires placement of compressor bracket bolts according to specified number before torque application reaches 47 N.m (475 kgf.cm, 34 ft.lbf). The compressor requires four bolts for installation which should be torqued to 25 N.m (250 kgf.cm, 18 ft.lbf) before connector attachment. Reinstall the discharge and suction hoses while torquing 2 bolts to 10 N.m (100 kgf.cm, 7 ft.lbf) after applying compressor oil on fresh O-ring pair for hose sealing. Reinstall the engine under cover after drive belt installation and check. The 5VZ-FE engine PS pump set bolt requires torquing to 43 N.m (440 kgf.cm, 32 ft.lbf) using the other parts. Reconnect the battery negative terminal while evacuating the refrigeration system and fill it with 600 plus or minus 50 g of refrigerant (21.16 plus or minus 1.76 oz). During the last step of the procedure you need to use a gas leak detector to check refrigerant leakage while also verifying joint torque setting before testing A/C functionality.

OEM 2002 Toyota Tacoma A/C Clutch

Air Conditioning Clutch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 A/C Clutches found

View related parts
2002 Toyota Tacoma Clutch Assembly
Part Number: 88410-34040
$144.98 MSRP: $205.24
You Save: $60.26 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch Assembly, Magnet; A/C Compressor Clutch; Clutch
- Replaces: 88410-30440
- Part Name Code: 88410
- Item Weight: 16.60 Pounds
- Item Dimensions: 11.6 x 7.2 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88410-34040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2002 Toyota Tacoma Submodels:
- Base, DLX, Pre Runner, SR5 | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS
View related parts
2002 Toyota Tacoma Clutch Assembly
Part Number: 88410-35340
$148.27 MSRP: $209.90
You Save: $61.63 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch Assembly, Magnet; A/C Compressor Clutch; Clutch
- Manufacturer Note: DEALER OPTION
- Replaces: 88410-04030
- Part Name Code: 88410
- Item Weight: 4.70 Pounds
- Item Dimensions: 8.0 x 6.9 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88410-35340
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2002 Toyota Tacoma Submodels:
- Base, DLX, Limited, Pre Runner, SR5, S-Runner | 6 Cyl 3.4 L GAS
View related parts
2002 Toyota Tacoma Clutch Coil
Part Number: 88411-02030
$138.83 MSRP: $196.53
You Save: $57.70 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Stator, Magnet Clutch; A/C Compressor Clutch Coil; Magnet; Coil; Stator Sub-Assembly, Magnet Clutch; A/C Compressor Clutch
- Replaces: 88411-2A030, 88411-22310, 88411-0C010, 88411-04010
- Part Name Code: 88302
- Item Weight: 2.00 Pounds
- Item Dimensions: 6.3 x 5.5 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88411-02030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2002 Toyota Tacoma Submodels:
- Base, DLX, Limited, Pre Runner, SR5, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2002 Toyota Tacoma Clutch
Part Number: 88410-34020
$145.10 MSRP: $205.41
You Save: $60.31 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch Assembly, Magnet; A/C Compressor Clutch
- Replaces: 88410-04020
- Part Name Code: 88410
- Item Weight: 5.50 Pounds
- Item Dimensions: 6.3 x 6.2 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88410-34020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2002 Toyota Tacoma Submodels:
- Base, DLX, Pre Runner, SR5 | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS
View related parts
2002 Toyota Tacoma Rotor
Part Number: 88412-35090
$342.26 MSRP: $501.58
You Save: $159.32 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor, Magnet Clutch; A/C Compressor Clutch Pulley; Rotor Sub-Assembly, Magnet Clutch; A/C Compressor Clutch
- Part Name Code: 88301
- Item Weight: 2.70 Pounds
- Item Dimensions: 5.7 x 5.4 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88412-35090
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2002 Toyota Tacoma Submodels:
- Base, DLX, Limited, Pre Runner, SR5, S-Runner | 6 Cyl 3.4 L GAS
View related parts
2002 Toyota Tacoma Rotor
Part Number: 88412-95J00
$285.01 MSRP: $406.92
You Save: $121.91 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor, Magnet Clutch; A/C Compressor Clutch Pulley; Rotor Sub-Assembly, Magnet Clutch; A/C Compressor Clutch
- Part Name Code: 88301
- Item Weight: 2.20 Pounds
- Item Dimensions: 5.9 x 5.4 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88412-95J00
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2002 Toyota Tacoma Submodels:
- Base, DLX, Pre Runner, SR5 | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS
View related parts
2002 Toyota Tacoma Hub Sub-Assembly, Magnet Clutch
Part Number: 88403-06050
Product Specifications
- Other Name: Hub Sub-Assembly, Magnet; A/C Compressor Clutch
- Replaces: 88403-30290
- Part Name Code: 88403
- Item Weight: 1.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88403-06050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2002 Toyota Tacoma Submodels:
- Base, DLX, Limited, Pre Runner, SR5, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS

2002 Toyota Tacoma A/C Clutch

Looking for affordable OEM 2002 Toyota Tacoma A/C Clutch? Explore our comprehensive catalogue of genuine 2002 Toyota Tacoma A/C Clutch. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2002 Toyota Tacoma Parts Questions & Experts Answers

Q: How to service and repair the A/C Clutch on 2002 Toyota Tacoma?
A: Begin compressor and magnetic clutch repair services after running the engine idle with A/C activated for ten minutes followed by engine stoppage to disconnect the negative (-) terminal cable from the battery. Discharge the system refrigerant before removing engine under cover and unfastening the suction and discharge hoses through 2 bolt removal steps alongside fitment of caps to stop system entry of moisture or dirt. Begin by first removing the compressor through fan shroud detachment followed by drive belt loosening and removing compressor mounting bolts. To remove the compressor bracket use four bolts for the 2RZ-FE and 3RZ-FE engine models but five bolts are required for the installation of the 5VZ-FE engine model. The installation process requires placement of compressor bracket bolts according to specified number before torque application reaches 47 N.m (475 kgf.cm, 34 ft.lbf). The compressor requires four bolts for installation which should be torqued to 25 N.m (250 kgf.cm, 18 ft.lbf) before connector attachment. Reinstall the discharge and suction hoses while torquing 2 bolts to 10 N.m (100 kgf.cm, 7 ft.lbf) after applying compressor oil on fresh O-ring pair for hose sealing. Reinstall the engine under cover after drive belt installation and check. The 5VZ-FE engine PS pump set bolt requires torquing to 43 N.m (440 kgf.cm, 32 ft.lbf) using the other parts. Reconnect the battery negative terminal while evacuating the refrigeration system and fill it with 600 plus or minus 50 g of refrigerant (21.16 plus or minus 1.76 oz). During the last step of the procedure you need to use a gas leak detector to check refrigerant leakage while also verifying joint torque setting before testing A/C functionality.