×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2002 Toyota Sienna Camshaft Position Sensor
Cam Position Sensor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Camshaft Position Sensor found
2002 Toyota Sienna Sensor, Camshaft Position
Part Number: 90080-19014$69.78 MSRP: $83.30You Save: $13.52 (17%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Sensor, Crank Position; Cam Position; Engine Camshaft; Crankshaft; RPM Sensor
- Replaces: 90919-05026
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.0 x 2.8 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90080-19014
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2002 Toyota Sienna Camshaft Position Sensor
Looking for affordable OEM 2002 Toyota Sienna Camshaft Position Sensor? Explore our comprehensive catalogue of genuine 2002 Toyota Sienna Camshaft Position Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2002 Toyota Sienna Camshaft Position Sensor Parts Q&A
- Q: How to replace the Camshaft Position Sensor on 2002 Toyota Sienna?A: The first step to replace a Camshaft Position Sensor requires use of a 5 mm hexagon wrench to remove three cap nuts and loosen the V-bank cover fastener counterclockwise before removing the cover. Begin by disconnecting the air cleaner hose with resonator and then disconnect the 2 camshaft position sensor connectors. After that detach the 2 camshaft position sensors from their bolts while also extracting the O-rings attached to them. You must install new O-rings on the sensors before installing them with their bolts and torquing them to 8.0 N.m (80 kgf.cm, 69 in.lbf). The procedure ends with reconnecting the two camshaft position sensor connectors. Reassemble the air cleaner hose with resonator by securing it through the 3 cap nuts using a 5 mm hexagon wrench then push down the V-bank cover fastener.