OEM 2001 Toyota Sienna Camshaft Position Sensor

2001 Toyota Sienna Parts Questions & Experts Answers

• Q: How to replace the Camshaft Position Sensor on 2001 Toyota Sienna?

  A: The first step to replace the Camshaft Position Sensor requires using a 5 mm hexagon wrench to remove the 3 cap nuts of the V-bank cover followed by counterclockwise rotation of fasteners before taking out the cover. Start by removing the air cleaner hose with resonator followed by disconnecting the 2 camshaft position sensors and their connectors and uninstalling their bolts. Remove the O-rings from the sensors during removal. To perform installation replace the new O-rings on the camshaft position sensors and fasten them with bolts using a torque setting of 8.0 N.m (80 kgf.cm, 69 in.lbf). Follow the installation steps by connecting the air cleaner hose with resonator to the V-bank cover through the application of 5 mm hexagon wrench and 3 cap nuts while pressing down the fastener.