Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2002 Toyota Sequoia Drive Shaft

Axle Shaft
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Drive Shafts found

  • 2002 Toyota Sequoia Drive Shaft - 37140-0C040
    2002 Toyota Sequoia Drive Shaft Diagram - 37140-0C040
    View related parts

    2002 Toyota Sequoia Drive Shaft, Front

    Part Number: 37140-0C040
    $307.43 MSRP: $438.94
    You Save: $131.51 (30%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Shaft Assembly, Propeller; Driveshaft; Shaft Assembly, Propeller, Front
    • Position: Front
    • Part Name Code: 37140
    • Item Weight: 14.60 Pounds
    • Item Dimensions: 34.7 x 6.7 x 5.6 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 37140-0C040
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2002 Toyota Sequoia Submodels:
    • Limited, SR5 | 8 Cyl 4.7 L GAS
  • 2002 Toyota Sequoia Drive Shaft - 37110-0C030
    2002 Toyota Sequoia Drive Shaft Diagram - 37110-0C030
    View related parts

    2002 Toyota Sequoia Drive Shaft, Rear

    Part Number: 37110-0C030
    $576.91 MSRP: $845.47
    You Save: $268.56 (32%)
    Product Specifications
    • Other Name: Shaft Assembly, Propeller; Driveshaft; Shaft Assembly, Propeller, Rear
    • Position: Rear
    • Part Name Code: 37110F
    • Item Weight: 25.10 Pounds
    • Item Dimensions: 100.1 x 10.3 x 7.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 37110-0C030
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2002 Toyota Sequoia Submodels:
    • Limited, SR5 | 8 Cyl 4.7 L GAS
  • 2002 Toyota Sequoia Drive Shaft - 37110-34080
    2002 Toyota Sequoia Drive Shaft Diagram - 37110-34080
    View related parts

    2002 Toyota Sequoia Drive Shaft, Rear

    Part Number: 37110-34080
    Product Specifications
    • Other Name: Shaft Assembly, Propeller; Driveshaft; Shaft Assembly, Propeller, Rear
    • Position: Rear
    • Part Name Code: 37110F
    • Item Weight: 24.40 Pounds
    • Item Dimensions: 98.2 x 10.2 x 7.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 37110-34080
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2002 Toyota Sequoia Submodels:
    • Limited, SR5 | 8 Cyl 4.7 L GAS

2002 Toyota Sequoia Drive Shaft

Looking for affordable OEM 2002 Toyota Sequoia Drive Shaft? Explore our comprehensive catalogue of genuine 2002 Toyota Sequoia Drive Shaft. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2002 Toyota Sequoia Parts Questions & Experts Answers

  • Q: How to service and repair the drive shaft on 2002 Toyota Sequoia?
    A: Service and repair of the drive/propeller shaft starts with removing the propeller shaft through a flange matchmarking process of differential and propeller shaft components followed by removing 4 nuts, washers and 4 stud bolts. Set Special Service Tool: 09325-40010 into the transmission to stop oil leakage while pulling the propeller shaft yoke from the transmission. When inspecting the propeller shaft tube place it in a vise with gentleness to prevent any form of deformation. Measure the propeller shaft and intermediate shaft runout using a dial indicator while checking for damage and inspecting the maximum allowable runout at 0.8 mm (0.031 inch); if any value exceeds these standards replace the parts. Check the spider bearing for damage as well as inspect its axial movement when turning the yoke of the flange while applying pressure to the shaft; maintain a maximum axial movement under 0.05 mm (0.0020 inch) and replace the bearing if limits are exceeded. Installation of this component requires users to detach the Special Service Tool: 09325-40010 from the transmission, after which they must position the yoke inside it. Finally they must align matchmarks between the flanges before tightening the 4 stud bolts with washers and nuts through appropriate 74 Nm (750 kgf-cm, 54 ft. lbs.) torque specifications.

Related 2002 Toyota Sequoia Parts

Alternate Year Models

+
2001 Toyota Sequoia Drive Shaft 2003 Toyota Sequoia Drive Shaft