Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2001 Toyota Sequoia Drive Shaft

Axle Shaft
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Drive Shafts found

  • 2001 Toyota Sequoia Drive Shaft - 37140-0C040
    2001 Toyota Sequoia Drive Shaft Diagram - 37140-0C040
    View related parts

    2001 Toyota Sequoia Drive Shaft, Front

    Part Number: 37140-0C040
    $307.43 MSRP: $438.94
    You Save: $131.51 (30%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Shaft Assembly, Propeller; Driveshaft; Shaft Assembly, Propeller, Front
    • Position: Front
    • Part Name Code: 37140
    • Item Weight: 14.60 Pounds
    • Item Dimensions: 34.7 x 6.7 x 5.6 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 37140-0C040
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2001 Toyota Sequoia Submodels:
    • Limited, SR5 | 8 Cyl 4.7 L GAS
  • 2001 Toyota Sequoia Drive Shaft - 37110-0C030
    2001 Toyota Sequoia Drive Shaft Diagram - 37110-0C030
    View related parts

    2001 Toyota Sequoia Drive Shaft, Rear

    Part Number: 37110-0C030
    $576.91 MSRP: $845.47
    You Save: $268.56 (32%)
    Product Specifications
    • Other Name: Shaft Assembly, Propeller; Driveshaft; Shaft Assembly, Propeller, Rear
    • Position: Rear
    • Part Name Code: 37110F
    • Item Weight: 25.10 Pounds
    • Item Dimensions: 100.1 x 10.3 x 7.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 37110-0C030
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2001 Toyota Sequoia Submodels:
    • Limited, SR5 | 8 Cyl 4.7 L GAS
  • 2001 Toyota Sequoia Drive Shaft - 37110-34080
    2001 Toyota Sequoia Drive Shaft Diagram - 37110-34080
    View related parts

    2001 Toyota Sequoia Drive Shaft, Rear

    Part Number: 37110-34080
    Product Specifications
    • Other Name: Shaft Assembly, Propeller; Driveshaft; Shaft Assembly, Propeller, Rear
    • Position: Rear
    • Part Name Code: 37110F
    • Item Weight: 24.40 Pounds
    • Item Dimensions: 98.2 x 10.2 x 7.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 37110-34080
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2001 Toyota Sequoia Submodels:
    • Limited, SR5 | 8 Cyl 4.7 L GAS

2001 Toyota Sequoia Drive Shaft

Looking for affordable OEM 2001 Toyota Sequoia Drive Shaft? Explore our comprehensive catalogue of genuine 2001 Toyota Sequoia Drive Shaft. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2001 Toyota Sequoia Parts Questions & Experts Answers

  • Q: How to service and repair the drive shaft on 2001 Toyota Sequoia?
    A: The drive/propeller shaft service starts with removing the propeller shaft through differential flange matchmarking and subsequent removal of four nuts with washers and four stud bolts. Push the transmission yoke of the propeller shaft out while using Special Service Tool: 09325-40010 to avoid transmission oil leakage. Check the tube of the propeller shaft for damage when placing it in a vise for inspecting purposes since excessive clamp strength can cause the tube to deform. A dial indicator should be used to check runout on the propeller shaft as well as the intermediate shaft for damage; do not exceed 0.8 mm (0.031 inch) maximum runout or replace the shaft. To check for wear and damage in the spider bearing use a procedure combining flange yoke rotation while holding the shaft tightly. Maximum allowable spider bearing axial play measurement is 0.05 mm (0.0020 inch) before replacing the bearing. Installation begins by removing Special Service Tool: 09325-40010 from the transmission then inserting the yoke inside while aligning matchmarks on the flanges and connecting them with 4 stud bolts, washers, and nuts which must be torqued to 74 Nm (750 kgf-cm, 54 ft. lbs.).

Related 2001 Toyota Sequoia Parts

Alternate Year Models

+
2002 Toyota Sequoia Drive Shaft