OEM 2002 Toyota MR2 Spyder ABS Control Module

2002 Toyota MR2 Spyder Parts Questions & Experts Answers

• Q: How to service and repair the ABS Control Module for Antilock Brakes on 2002 Toyota MR2 Spyder?

  A: Service on the Hydraulic Control Assembly for Antilock Brakes begins with removing both the tool box and the luggage compartment trim box cover. The six brake lines of the ABS actuator need to be separated through the use of Special Service Tool: 09023-00100. To extract the ABS actuator the technician first disconnects 2 harness clamps and 2 actuator connectors before taking out the 2 bolts and nut and ABS actuator assembly and removing the 2 nuts and ABS actuator from the actuator bracket and finishing by detaching 2 holders together with 3 cushions from the ABS actuator. First install the 2 holders with 3 cushions onto the ABS actuator before screwing the actuator bracket onto the bracket with 2 nuts that should be torqued to 5.4 Nm (55 kgf-cm, 48 inch lbs.). Fasten the ABS actuator assembly with 2 bolts and a nut while torquing them to 19 Nm (195 kgf-cm, 14 ft. lbs.) and connect the 2 harness clamps and the 2 actuator connectors. Use Special Service Tool: 09023-00100 with a torque setting at 15 Nm and 14 Nm to connect the brake lines to the ABS actuator by inserting the tool into a torque wrench with a 30 cm (11.81 inch) fulcrum length. After adding brake fluid into the reservoir you must bleed the brake system while inspecting for fluid leaks before reinstalling the luggage compartment trim box cover followed by the tool box.