×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2002 Toyota Avalon Fuel Pressure Regulator
Fuel Tank Pressure Regulator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Fuel Pressure Regulator found
2002 Toyota Avalon Fuel Pressure Regulator
Part Number: 23280-22010$80.57 MSRP: $113.09You Save: $32.52 (29%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Regulator Assembly, Fuel; Fuel Injection Pressure Regulator; Pressure Regulator; Regulator Assembly, Fuel Pressure
- Manufacturer Note: TYPE B:REFER TO ILLUSTRATION
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.9 x 4.0 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 23280-22010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2002 Toyota Avalon Fuel Pressure Regulator
Looking for affordable OEM 2002 Toyota Avalon Fuel Pressure Regulator? Explore our comprehensive catalogue of genuine 2002 Toyota Avalon Fuel Pressure Regulator. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2002 Toyota Avalon Fuel Pressure Regulator Parts Q&A
- Q: How to service the Fuel Pressure Regulator on 2002 Toyota Avalon?A: The Fuel Pressure Regulator service starts with removing the fuel pump assembly from the fuel tank followed by using a screwdriver to remove and pull out the fuel filter while maintaining 2.0 N.m (20 kgf.cm, 17 in.lbf) torque. The procedure requires a new O-ring installation after applying a light gasoline coating to it. Then position the O-ring on the fuel filter. Unscrew and pull out the fuel pressure regulator according to procedure then confirm a torque of 2.0 N.m (20 kgf.cm, 17 in.lbf). Use a light gasoline coating to prepare a new O-ring which should be installed onto the pressure regulator after removing its prior O-ring. Installation occurs by following the opposite sequence of the removal steps.