×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2002 Toyota Avalon Brake Fluid Pump
ABS Pump Motor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Brake Fluid Pump found
Product Specifications- Other Name: Pump Assembly, Vsc; ABS Pump And Motor Assembly; ABS Control Module; Pump; Pump Assembly, Brake Traction
- Replaces: 47980-07010
- Part Name Code: 47980
- Item Weight: 4.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 47980-07020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2002 Toyota Avalon Brake Fluid Pump
Looking for affordable OEM 2002 Toyota Avalon Brake Fluid Pump? Explore our comprehensive catalogue of genuine 2002 Toyota Avalon Brake Fluid Pump. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2002 Toyota Avalon Brake Fluid Pump Parts Q&A
- Q: How to service and repair the brake fluid pump on 2002 Toyota Avalon?A: Start the brake fluid pump service and repair procedure by removing the air cleaner case followed by the air cleaner hose and then uninstalling the master cylinder. Disconnect the precharge pump connector before taking out the precharge pump assembly by loosening the 3 bolts to 19 Nm (195 kgf-cm, 14 ft. lbs.). Special Service Tool: 09751-36011 should be used to disconnect the 2 brake lines from the precharge pump by tightening the 10 mm nut to 15 Nm (155 kgf-cm, 11 ft. lbs.) and the 12 mm nut to 20 Nm (200 kgf-cm, 15 ft. lbs.). Eliminate the precharge pump by first unscrewing and unbolting the 2 nuts and 2 bolts at 13 Nm (130 kgf-cm, 9 ft. lbs.), then disassemble the 2 holders, 2 collars, 2 washers, and 4 cushions. A 30 mm deeper socket wrench should be used for master cylinder pressure sensor and O-ring removal while applying 81 Nm of torque (830 kgf-cm or 60 ft. lbs.) after securely placing the precharge pump in a vise with cloth. After completion follow the opposite sequence of removal while performing fluid filling of the brake reservoir followed by brake system bleeding and checking for fluid leaks.