How do you remove and install a coil spring on 2002 Toyota 4Runner?

The coil spring removal begins with axing up the rear axle housing and supporting the frame with stands before securing the rear axle housing with jack support. Detach the wheel after tightening it to 110 Nm (1,150 kgf-cm, 83 ft. lbs.). The parking brake cable bracket needs to be detached from the rear axle housing using 13 Nm (130 kgf-cm or 9 ft. lbs.) torque. The procedure to remove the rear shock absorber starts by using 64 Nm (650 kgf-cm, 47 ft. lbs.) torque to remove the bolt alongside 2 washers and 2 bushings then turning the shock absorber while holding the nut results in the removal of 3 retainers, 2 cushions and shock absorber at a torque of 20 Nm (200 kgf-cm, 14 ft. lbs.). Discard the stabilizer bar brackets from the frame structure and separate the lateral control rod from its position. Proceed with a methodical rear axle housing lowering that prevents brake line trauma and remove the coil spring. When installing the coil spring end must be positioned correctly or reinstall it. To examine the shock absorber operation first press it while inspecting for uniform movement without any abnormal resistance or noises during the stroke. The speed of return for gas-filled shock absorbers should be constant during a full compression cycle; this speed information usually appears engraved on the shell. Before discarding a gas-filled shock absorber drill a 2 - 3 mm (0.079 - 0.118 inch) hole at the specified spot to release the gas while keeping in mind that the gas is without color or smell and poses no toxicity risks yet chips may spread during drilling. The installation process requires steps which reverse the sequence used for removal.

OEM 2002 Toyota 4Runner Coil Springs

Strut Spring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Coil Springs found

View related parts
2002 Toyota 4Runner Coil Spring, Passenger Side
Part Number: 48131-35400
$165.55 MSRP: $234.35
You Save: $68.80 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Coil, Front; Coil Spring, Front Left, Front Right; Coil Spring Kit Front; Coil Spring Set; Coil Springs; Spring; Spring, Front Coil, Passenger Side
- Manufacturer Note: L=368.0,W(265/70R16 TIRE)
- Position: Passenger Side
- Replaces: 48131-35140
- Part Name Code: 48131
- Item Weight: 7.30 Pounds
- Item Dimensions: 15.8 x 7.0 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48131-35400
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2002 Toyota 4Runner Submodels:
- Base, Limited, SR5 | 6 Cyl 3.4 L GAS
View related parts
2002 Toyota 4Runner Coil Spring, Rear
Part Number: 48231-35250
$103.44 MSRP: $145.20
You Save: $41.76 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Coil, Rear; Coil Spring, Rear; Coil Spring Kit Rear; Coil Spring Set; Coil Springs; Spring; Spring, Coil, Rear Passenger Side; Spring, Coil, Rear Driver Side
- Manufacturer Note: W(265/70R16 TIRE)
- Position: Rear
- Item Weight: 4.30 Pounds
- Item Dimensions: 17.2 x 11.0 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48231-35250
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2002 Toyota 4Runner Submodels:
- Base, Limited, SR5 | 6 Cyl 3.4 L GAS
View related parts
2002 Toyota 4Runner Coil Spring, Rear
Part Number: 48231-35200
$94.67 MSRP: $132.88
You Save: $38.21 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Coil, Rear; Coil Spring, Rear, Rear Left, Rear Right; Coil Spring Kit Rear; Coil Spring Set; Coil Springs; Spring; Spring, Coil, Rear Passenger Side; Spring, Coil, Rear Driver Side
- Position: Rear
- Item Weight: 7.20 Pounds
- Item Dimensions: 31.2 x 8.3 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48231-35200
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2002 Toyota 4Runner Submodels:
- Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2002 Toyota 4Runner Coil Spring, Rear
Part Number: 48231-35190
Product Specifications
- Other Name: Spring, Coil, Rear; Coil Spring, Rear, Rear Left, Rear Right; Coil Spring Kit Rear; Coil Spring Set; Coil Springs; Spring; Spring, Coil, Rear Passenger Side; Spring, Coil, Rear Driver Side
- Position: Rear
- Item Weight: 6.60 Pounds
- Item Dimensions: 16.7 x 10.8 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48231-35190
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2002 Toyota 4Runner Submodels:
- Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2002 Toyota 4Runner Coil Spring, Front
Part Number: 48131-35120
$147.56 MSRP: $208.88
You Save: $61.32 (30%)
Product Specifications
- Other Name: Spring, Coil, Front; Coil Spring, Front Left, Front Right; Coil Spring Set; Coil Springs; Spring; Spring, Front Coil, Passenger Side; Spring, Front Coil, Driver Side
- Manufacturer Note: L=344.0
- Position: Front
- Item Weight: 10.20 Pounds
- Item Dimensions: 15.9 x 6.9 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48131-35120
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2002 Toyota 4Runner Submodels:
- Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2002 Toyota 4Runner Coil Spring, Driver Side
Part Number: 48131-35290
Product Specifications
- Other Name: Spring, Coil, Front; Coil Spring, Front Left; Coil Spring Kit Front; Coil Spring Set; Coil Springs; Spring; Spring, Front Coil, Driver Side
- Manufacturer Note: L=338.0
- Position: Driver Side
- Part Name Code: 48132
- Item Weight: 10.00 Pounds
- Item Dimensions: 15.6 x 6.9 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48131-35290
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2002 Toyota 4Runner Submodels:
- Base, Limited, SR5 | 6 Cyl 3.4 L GAS
View related parts
2002 Toyota 4Runner Spring, Driver Side
Part Number: 48131-35440
Product Specifications
- Other Name: Spring, Coil, Front; Coil Spring, Front Left; Coil Spring Kit Front; Coil Spring Set; Coil Springs; Spring, Front Coil, Driver Side
- Manufacturer Note: L=322.5
- Position: Driver Side
- Part Name Code: 48132
- Item Weight: 7.30 Pounds
- Item Dimensions: 16.1 x 6.9 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48131-35440
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2002 Toyota 4Runner Submodels:
- Base, SR5 | 6 Cyl 3.4 L GAS
View related parts
2002 Toyota 4Runner Coil Spring, Front
Part Number: 48131-35110
Product Specifications
- Other Name: Spring, Coil, Front; Coil Spring, Front Left, Front Right; Coil Spring Set; Coil Springs; Spring; Spring, Front Coil, Passenger Side; Spring, Front Coil, Driver Side
- Manufacturer Note: L=327.5
- Position: Front
- Item Weight: 8.30 Pounds
- Item Dimensions: 15.9 x 7.0 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48131-35110
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2002 Toyota 4Runner Submodels:
- Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2002 Toyota 4Runner Coil Spring, Front
Part Number: 48131-35100
Product Specifications
- Other Name: Spring, Coil, Front; Coil Spring, Front Left, Front Right; Coil Spring Kit Front; Coil Spring Set; Coil Springs; Spring; Spring, Front Coil, Passenger Side; Spring, Front Coil, Driver Side
- Manufacturer Note: L=324.0
- Position: Front
- Item Weight: 8.60 Pounds
- Item Dimensions: 15.9 x 6.9 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48131-35100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2002 Toyota 4Runner Submodels:
- Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2002 Toyota 4Runner Spring, Passenger Side
Part Number: 48131-35430
Product Specifications
- Other Name: Spring, Coil, Front; Coil Spring, Front Right; Coil Spring Kit Front; Coil Spring Set; Coil Springs; Spring, Front Coil, Passenger Side
- Manufacturer Note: L=316.5
- Position: Passenger Side
- Part Name Code: 48131
- Item Weight: 7.00 Pounds
- Item Dimensions: 15.9 x 6.9 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48131-35430
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2002 Toyota 4Runner Submodels:
- Base, SR5 | 6 Cyl 3.4 L GAS

2002 Toyota 4Runner Coil Springs

Looking for affordable OEM 2002 Toyota 4Runner Coil Springs? Explore our comprehensive catalogue of genuine 2002 Toyota 4Runner Coil Springs. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2002 Toyota 4Runner Parts Questions & Experts Answers

Q: How do you remove and install a coil spring on 2002 Toyota 4Runner?
A: The coil spring removal begins with axing up the rear axle housing and supporting the frame with stands before securing the rear axle housing with jack support. Detach the wheel after tightening it to 110 Nm (1,150 kgf-cm, 83 ft. lbs.). The parking brake cable bracket needs to be detached from the rear axle housing using 13 Nm (130 kgf-cm or 9 ft. lbs.) torque. The procedure to remove the rear shock absorber starts by using 64 Nm (650 kgf-cm, 47 ft. lbs.) torque to remove the bolt alongside 2 washers and 2 bushings then turning the shock absorber while holding the nut results in the removal of 3 retainers, 2 cushions and shock absorber at a torque of 20 Nm (200 kgf-cm, 14 ft. lbs.). Discard the stabilizer bar brackets from the frame structure and separate the lateral control rod from its position. Proceed with a methodical rear axle housing lowering that prevents brake line trauma and remove the coil spring. When installing the coil spring end must be positioned correctly or reinstall it. To examine the shock absorber operation first press it while inspecting for uniform movement without any abnormal resistance or noises during the stroke. The speed of return for gas-filled shock absorbers should be constant during a full compression cycle; this speed information usually appears engraved on the shell. Before discarding a gas-filled shock absorber drill a 2 - 3 mm (0.079 - 0.118 inch) hole at the specified spot to release the gas while keeping in mind that the gas is without color or smell and poses no toxicity risks yet chips may spread during drilling. The installation process requires steps which reverse the sequence used for removal.

Related 2002 Toyota 4Runner Parts

Alternate Year Models

2001 Toyota 4Runner Coil Springs 2003 Toyota 4Runner Coil Springs