Other Name: Belt Assembly, Front Seat; Seat Belt Lap and Shoulder Belt, Front Left; Belt & Retractor; Belt Assembly, Front Seat Outer, Driver Side
Manufacturer Note: GRAY,TRIM1#
Position: Driver Side
Part Name Code: 73220
Item Weight: 5.20 Pounds
Item Dimensions: 10.3 x 9.4 x 7.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 73220-48040-B1
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2001 Toyota Highlander Submodels:
Base, Limited | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
2001 Toyota Highlander Seat Belt
Looking for affordable OEM 2001 Toyota Highlander Seat Belt? Explore our comprehensive catalogue of genuine 2001 Toyota Highlander Seat Belt. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2001 Toyota Highlander Parts Questions & Experts Answers
Q: How to replace the rear seat belt on 2001 Toyota Highlander?
A: The procedure to replace a rear seat belt starts by taking off both the rear seat assemblies then unfastening the rear seat headrest assemblies which include RH [71940B / 98-130] and center [71960B / 98-130]. The following items need removal from the repair area: the rear seat back board carpet assembly RH [71880A / 98-130] in addition to the separate type rear seat cushion assembly [71460S], rear seat armrest assembly center [72830 / 98-130] and rear seat lock control lever sub-assembly RH [72057 / 98-130]. Continue by removing the rear seat shoulder belt cover [73373 / 98-131], separate type rear seat back assembly [71480S], rear door scuff plate RH [67917A / 98-115], rear door opening trim Weather Strip RH [62331A / 98-115], tonneau cover assembly [64910J / 98-117], deck board sub-assembly [58401 E / 98-117], deck board sub-assembly No.2 [58408A / 98-117], deck board sub-assembly No.3 [58409A / 98-117], luggage compartment tray [64421A / 9-117], spare wheel cover tray [64779 / 9-117], deck side trim box RH [64741 B / 98-117], and deck side trim box LH [64742C / 98-117]. The technician should first remove the rear floor finish plate [58387B / 98-117] along with the deck trim side panel assembly RH [64730B / 98-117]. The rear No.1 seat belt assembly outer RH [73360C / 98-131] needs bolt removal before proceeding to remove rear seat belt assembly outer center [733500 / 98-131] with a nut followed by removal of the rear seat belt assembly inner [73380A / 98-131] through bolt removal. Insert the rear seat belt assembly inner component [73380A / 98-131] after applying the bolt and torque it to 42.0 N.m (420 kgf.cm, 31 ft.lbf). During installation of the rear seat belt assembly outer center [73350C / 98-131] make sure the ELR lock works properly by verifying the belt locks when drawn out at a fast speed. Position the rear No.1 seat belt assembly outer RH [733600 / 98-131] while verifying that belt extension exceeds 45 degrees when the ELR is locked. The floor anchor gets installed along with its bolt at 42.0 N.m (420 kgf.cm, 31 ft.lbf) torque while it must avoid running against the floor panel protrusion. The remaining step is to place the rear No.1 seat belt assembly outer using the bolt which requires 42.0 N.m (420 kgf.cm, 31 ft.lbf) torque.