How to service and repair the vacuum brake booster on 2001 Toyota Camry?

The first step to repair or service the vacuum brake booster requires the removal of the air cleaner cover with air cleaner hose then master cylinder and charcoal canister. Through hose disconnect from the brake booster you can gain access to remove the pedal return spring and its related attachments including clip and clevis pin. Start the process by removing brake booster and its gasket together with clevis through the 4 nuts that also detach the clevis before finally pulling out both elements. To install the new system begin by placing the new gasket on the master cylinder and then installing both the brake booster with its new gasket while connecting the clevis to the operating rod and finally torquing the booster installation nuts to 13 Nm (130 kgf-cm, 9 ft. lbs.). Install the clevis before torquing the lock nut to 25 Nm (260 kgf-cm, 19 ft. lbs.). After that, insert the clevis pin into the clevis and brake pedal and fasten it using the clip. A new gasket should be placed onto the master cylinder followed by installing the Special Service Tool: 09737-00010 on top of the gasket to adjust the length of the booster push rod by lowering the pin until it barely contacts the piston. Use the upside-down Special Service Tool: 09737-00010 to measure the gap between the booster push rod and pin head to verify a 0 mm (0 inch) distance before adjusting the push rod to attain light contact with the pin head. The technician should reinstall the charcoal canister followed by the master cylinder and air cleaner cover with air cleaner hose then connect the vacuum hose to the brake booster and fill the brake reservoir with brake fluid before performing a brake system bleeding procedure. The procedure ends with inspecting fluid leakage while verifying brake pedal position then conducting operational procedures.

OEM 2001 Toyota Camry Brake Booster

Brake Power Booster

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Brake Boosters found

View related parts
2001 Toyota Camry Brake Booster
Part Number: 44610-06170
$912.39 MSRP: $1337.12
You Save: $424.73 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster Assembly, Brake; Booster Assembly
- Manufacturer Note: W(TRACTION CONTROL),(L)
- Replaces: 44610-33580
- Part Name Code: 44610
- Item Weight: 9.80 Pounds
- Item Dimensions: 16.2 x 10.4 x 10.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44610-06170
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Camry Submodels:
- CE, LE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 6 Cyl 3.0 L GAS
View related parts
2001 Toyota Camry Booster Assembly, Brake
Part Number: 44610-33531
$877.47 MSRP: $1285.94
You Save: $408.47 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Brake Booster
- Manufacturer Note: W(TRACTION CONTROL)
- Part Name Code: 44610
- Item Weight: 10.20 Pounds
- Item Dimensions: 16.1 x 10.7 x 10.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44610-33531
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Camry Submodels:
- CE, LE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 6 Cyl 3.0 L GAS
View related parts
2001 Toyota Camry Booster Assembly, Brake
Part Number: 44610-33630
$875.26 MSRP: $1282.69
You Save: $407.43 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Brake Booster
- Manufacturer Note: W(TRACTION CONTROL)
- Part Name Code: 44610
- Item Weight: 9.70 Pounds
- Item Dimensions: 16.4 x 10.3 x 10.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44610-33630
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Camry Submodels:
- CE, LE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 6 Cyl 3.0 L GAS
View related parts
2001 Toyota Camry Brake Booster
Part Number: 44610-33551
$839.75 MSRP: $1230.66
You Save: $390.91 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster Assembly, Brake; Power Brake Booster
- Part Name Code: 44610
- Item Weight: 9.50 Pounds
- Item Dimensions: 16.5 x 10.7 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44610-33551
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Camry Submodels:
- CE, LE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 6 Cyl 3.0 L GAS
View related parts
2001 Toyota Camry Brake Booster
Part Number: 44610-06200
Product Specifications
- Other Name: Booster Assembly, Brake; Power Brake Booster; Power Booster
- Replaces: 44610-33610
- Part Name Code: 44610
- Item Weight: 10.30 Pounds
- Item Dimensions: 16.0 x 10.1 x 10.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44610-06200
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Camry Submodels:
- CE, LE, SE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
2001 Toyota Camry Brake Booster
Part Number: 44610-06190
Product Specifications
- Other Name: Booster Assembly, Brake; Power Brake Booster; Power Booster; Booster Assembly
- Manufacturer Note: (L)
- Replaces: 44610-06140, 44610-33600
- Part Name Code: 44610
- Item Weight: 9.80 Pounds
- Item Dimensions: 16.0 x 10.5 x 10.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44610-06190
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Camry Submodels:
- CE, LE, SE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
2001 Toyota Camry Booster Assembly
Part Number: 44610-33550
Product Specifications
- Other Name: Booster Assembly, Brake; Power Brake Booster; Brake Booster
- Manufacturer Note: W(ABS)
- Part Name Code: 44610
- Item Weight: 9.50 Pounds
- Item Dimensions: 16.7 x 10.6 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44610-33550
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Camry Submodels:
- CE, LE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 6 Cyl 3.0 L GAS

2001 Toyota Camry Brake Booster

Looking for affordable OEM 2001 Toyota Camry Brake Booster? Explore our comprehensive catalogue of genuine 2001 Toyota Camry Brake Booster. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2001 Toyota Camry Parts Questions & Experts Answers

Q: How to service and repair the vacuum brake booster on 2001 Toyota Camry?
A: The first step to repair or service the vacuum brake booster requires the removal of the air cleaner cover with air cleaner hose then master cylinder and charcoal canister. Through hose disconnect from the brake booster you can gain access to remove the pedal return spring and its related attachments including clip and clevis pin. Start the process by removing brake booster and its gasket together with clevis through the 4 nuts that also detach the clevis before finally pulling out both elements. To install the new system begin by placing the new gasket on the master cylinder and then installing both the brake booster with its new gasket while connecting the clevis to the operating rod and finally torquing the booster installation nuts to 13 Nm (130 kgf-cm, 9 ft. lbs.). Install the clevis before torquing the lock nut to 25 Nm (260 kgf-cm, 19 ft. lbs.). After that, insert the clevis pin into the clevis and brake pedal and fasten it using the clip. A new gasket should be placed onto the master cylinder followed by installing the Special Service Tool: 09737-00010 on top of the gasket to adjust the length of the booster push rod by lowering the pin until it barely contacts the piston. Use the upside-down Special Service Tool: 09737-00010 to measure the gap between the booster push rod and pin head to verify a 0 mm (0 inch) distance before adjusting the push rod to attain light contact with the pin head. The technician should reinstall the charcoal canister followed by the master cylinder and air cleaner cover with air cleaner hose then connect the vacuum hose to the brake booster and fill the brake reservoir with brake fluid before performing a brake system bleeding procedure. The procedure ends with inspecting fluid leakage while verifying brake pedal position then conducting operational procedures.