How to service and repair the vacuum brake booster on 2000 Toyota Camry?

The service and repair of the vacuum brake booster requires a technician to remove sequentially the air cleaner cover and air cleaner hose then master cylinder and charcoal canister. The first step is disconnecting the vacuum hose from the brake booster before you take out the pedal return spring together with its clip and clevis pin. To service the brake booster one must remove its components starting with 4 clevis nuts and clevis which reveals the brake booster and its gasket. Installing the new gasket requires placement before putting the booster into position followed by mounting the booster onto the operating rod using the clevis. Torque the booster installation nuts to 13 Nm (130 kgf-cm, 9 ft. lbs.) and the clevis lock nut to 25 Nm (260 kgf-cm, 19 ft. lbs.). Place the clevis pin through the clevis then brake pedal combination followed by attaching the clip before putting back the pedal return spring. You can set the Special Service Tool: 09737-00010 on the new gasket positioned on the master cylinder so you can lower the pin until it touches the piston lightly. Place the Special Service Tool: 09737-00010 upside down on the booster to measure the clearance between the push rod and pin head while the clearance should equal 0 mm (0 inch). Lengthen or shorten the booster push rod until its end barely contacts the pin head. After reinstalling the charcoal canister together with the master cylinder and air cleaner cover you must secure the air cleaner hose before connecting the vacuum hose to the brake booster. The brake fluid reservoir should receive a refill before the technician completes brake system bleeding while inspecting for fluid leaks. The completion of checks on brake pedal performance and operational testing should be performed as the last step.

OEM 2000 Toyota Camry Brake Booster

Brake Power Booster

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Brake Boosters found

View related parts
2000 Toyota Camry Brake Booster
Part Number: 44610-33510
$877.17 MSRP: $1285.51
You Save: $408.34 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster Assembly, Brake; Power Brake Booster
- Part Name Code: 44610
- Item Weight: 10.00 Pounds
- Item Dimensions: 16.1 x 10.3 x 10.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44610-33510
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Camry Submodels:
- CE, LE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 6 Cyl 3.0 L GAS
View related parts
2000 Toyota Camry Brake Booster
Part Number: 44610-06170
$912.39 MSRP: $1337.12
You Save: $424.73 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster Assembly, Brake; Booster Assembly
- Manufacturer Note: W(TRACTION CONTROL),(L)
- Replaces: 44610-33580
- Part Name Code: 44610
- Item Weight: 9.80 Pounds
- Item Dimensions: 16.2 x 10.4 x 10.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44610-06170
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Camry Submodels:
- CE, LE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 6 Cyl 3.0 L GAS
View related parts
2000 Toyota Camry Booster Assembly, Brake
Part Number: 44610-33531
$877.47 MSRP: $1285.94
You Save: $408.47 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Brake Booster
- Manufacturer Note: W(TRACTION CONTROL)
- Part Name Code: 44610
- Item Weight: 10.20 Pounds
- Item Dimensions: 16.1 x 10.7 x 10.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44610-33531
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Camry Submodels:
- CE, LE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 6 Cyl 3.0 L GAS
View related parts
2000 Toyota Camry Brake Booster
Part Number: 44610-06200
Product Specifications
- Other Name: Booster Assembly, Brake; Power Brake Booster; Power Booster
- Replaces: 44610-33610
- Part Name Code: 44610
- Item Weight: 10.30 Pounds
- Item Dimensions: 16.0 x 10.1 x 10.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44610-06200
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Camry Submodels:
- CE, LE, SE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
2000 Toyota Camry Brake Booster
Part Number: 44610-06190
Product Specifications
- Other Name: Booster Assembly, Brake; Power Brake Booster; Power Booster; Booster Assembly
- Manufacturer Note: (L)
- Replaces: 44610-06140, 44610-33600
- Part Name Code: 44610
- Item Weight: 9.80 Pounds
- Item Dimensions: 16.0 x 10.5 x 10.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44610-06190
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Camry Submodels:
- CE, LE, SE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
2000 Toyota Camry Brake Booster
Part Number: 44610-06180
Product Specifications
- Other Name: Booster Assembly, Brake
- Replaces: 44610-33590
- Part Name Code: 44610
- Item Weight: 10.40 Pounds
- Item Dimensions: 16.0 x 10.2 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44610-06180
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Camry Submodels:
- CE, LE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 6 Cyl 3.0 L GAS
View related parts
2000 Toyota Camry Booster Assembly
Part Number: 44610-33550
Product Specifications
- Other Name: Booster Assembly, Brake; Power Brake Booster; Brake Booster
- Manufacturer Note: W(ABS)
- Part Name Code: 44610
- Item Weight: 9.50 Pounds
- Item Dimensions: 16.7 x 10.6 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44610-33550
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Camry Submodels:
- CE, LE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 6 Cyl 3.0 L GAS

2000 Toyota Camry Brake Booster

Looking for affordable OEM 2000 Toyota Camry Brake Booster? Explore our comprehensive catalogue of genuine 2000 Toyota Camry Brake Booster. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2000 Toyota Camry Parts Questions & Experts Answers

Q: How to service and repair the vacuum brake booster on 2000 Toyota Camry?
A: The service and repair of the vacuum brake booster requires a technician to remove sequentially the air cleaner cover and air cleaner hose then master cylinder and charcoal canister. The first step is disconnecting the vacuum hose from the brake booster before you take out the pedal return spring together with its clip and clevis pin. To service the brake booster one must remove its components starting with 4 clevis nuts and clevis which reveals the brake booster and its gasket. Installing the new gasket requires placement before putting the booster into position followed by mounting the booster onto the operating rod using the clevis. Torque the booster installation nuts to 13 Nm (130 kgf-cm, 9 ft. lbs.) and the clevis lock nut to 25 Nm (260 kgf-cm, 19 ft. lbs.). Place the clevis pin through the clevis then brake pedal combination followed by attaching the clip before putting back the pedal return spring. You can set the Special Service Tool: 09737-00010 on the new gasket positioned on the master cylinder so you can lower the pin until it touches the piston lightly. Place the Special Service Tool: 09737-00010 upside down on the booster to measure the clearance between the push rod and pin head while the clearance should equal 0 mm (0 inch). Lengthen or shorten the booster push rod until its end barely contacts the pin head. After reinstalling the charcoal canister together with the master cylinder and air cleaner cover you must secure the air cleaner hose before connecting the vacuum hose to the brake booster. The brake fluid reservoir should receive a refill before the technician completes brake system bleeding while inspecting for fluid leaks. The completion of checks on brake pedal performance and operational testing should be performed as the last step.