×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2001 Toyota 4Runner A/C Condenser
Air Conditioning Condenser- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 A/C Condensers found
2001 Toyota 4Runner Condenser Assembly
Part Number: 88460-AZ011$113.18 MSRP: $158.63You Save: $45.45 (29%)Product Specifications- Other Name: A/C Condenser
- Item Weight: 4.50 Pounds
- Condition: New
- SKU: 88460-AZ011
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2001 Toyota 4Runner Condenser Assembly
Part Number: 88461-35050$282.62 MSRP: $403.51You Save: $120.89 (30%)Product Specifications- Other Name: Core, Condenser; A/C Condenser; Condenser; Condenser Assembly, Cooler
- Part Name Code: 88460
- Item Weight: 3.50 Pounds
- Item Dimensions: 31.5 x 24.4 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88461-35050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2001 Toyota 4Runner A/C Condenser
Looking for affordable OEM 2001 Toyota 4Runner A/C Condenser? Explore our comprehensive catalogue of genuine 2001 Toyota 4Runner A/C Condenser. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2001 Toyota 4Runner A/C Condenser Parts Q&A
- Q: How to service and repair the A/C Condenser on 2001 Toyota 4Runner?A: Proceeding with HVAC condenser servicing requires refrigerant discharge from the refrigeration system followed by evacuation before adding 650 plus or minus 50 g (22.92 plus or minus 1.76 oz.) of refrigerant then inspecting for leaks. The service begins with radiator grill removal and horn disposal and hood lock removal followed by removal of the center brace and the receiver and holder as well as disconnecting the liquid tube and discharge hose by loosening the two bolts to be torqued at 10 N.m (100 kgf.cm, 7 ft.lbf). The system must immediately get fitted with caps to secure the entrances against moisture or dirt contamination as technicians prepare new O-ring lubrication using compressor oil before their installation on the tubing. The procedure to remove the condenser begins by removing two bolts and lower brackets after which four bolts and upper brackets need replacement before pulling the condenser forward and upward. Distributing 40-50cc (1.4-1.7 fl.oz.) of ND-OIL 8 or equivalent compressor oil is necessary during condenser replacement. The procedure for fitting new components follows exactly the opposite sequence used for taking components out.