How to remove the A/C Condenser from the HVAC system on Toyota 4Runner?

The first step to extract a condenser from an HVAC system requires the refrigeration system to be free of refrigerant. First disconnect the discharge hose sub-assembly through bolt removal and by detaching it from the cooler condenser assembly before carefully extracting the O-ring from within the cooler refrigerant discharge hose sub-assembly. The disconnected parts require vinyl tape application for moisture and foreign matter prevention at their opening. The air conditioning tube assembly disconnect process requires removing the bolt first which separates the tube from the cooler condenser assembly before removing its O-ring then using vinyl tape for sealing the opening. Remove cooler condenser cushion No. 2 by starting with cooler condenser bracket No. 1 and the nut followed by removal of 4 bolts and the cooling component cushion No. 2. To begin the procedure you should take away cooler condenser cushion No. 1 by undoing its four bolts and extracting both the bolts and cushion. Take out the cooler condenser core as the last step.

How to install an A/C Condenser on Toyota 4Runner?

You should start cooler condenser installation by tightening 4 bolts on cooler condenser cushion No.1 to 5.4 Nm (55 kgf-cm, 47 in-lbf). The installation sequence starts by attaching cooler condenser cushion No. 2 through 4 bolts and a nut then torquing it to 5.4 Nm (55 kgf-cm, 47 in-lbf) and follows by screwing in cooler condenser bracket No. 1 with torquing to the same 5.4 Nm (55 kgf-cm, 47 in-lbf). The installation process of the air conditioning tube component requires stainless steel bolt torquing to 5.4 Nm (55 kgf-cm, 47 in-lbf) after installing the O-ring alongside adding compressor oil (ND-OIL 8 or equivalent) to the O-ring and pipe joint surface. Apply the same installation process to the discharge hose sub-assembly by deleting the vinyl tape then adding compressor oil to a fresh O-ring followed by O-ring installation and security of the sub-assembly to the cooler condenser with a bolt torqued to 5.4 Nm (55 kgf-cm, 47 in-lbf). The operation ends with charging the system following engine warming while checking for refrigerant leakage signs.

OEM Toyota 4Runner A/C Condenser

Air Conditioning Condenser

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

15 A/C Condensers found

View related parts
Toyota 4Runner Condenser Assembly
Part Number: 88460-AZ016
$147.31 MSRP: $208.20
You Save: $60.89 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: A/C Condenser
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2009 Toyota 4Runner | Limited, Sport, SR5 | 6 Cyl 4.0 L GAS
View related parts
Toyota 4Runner Core, Cooler Condenser
Part Number: 88461-60091
$344.22 MSRP: $491.47
You Save: $147.25 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Core; A/C Condenser
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2009 Toyota 4Runner | Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Toyota 4Runner Condenser Assembly
Part Number: 88460-AZ011
$113.18 MSRP: $158.63
You Save: $45.45 (29%)
ADD TO CART
Product Specifications
- Other Name: A/C Condenser
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1996-2002 Toyota 4Runner | Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
Toyota 4Runner Condenser Assembly
Part Number: 88460-AZ030
$143.80 MSRP: $203.23
You Save: $59.43 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: A/C Condenser
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003 Toyota 4Runner | Limited, Sport, SR5 | 6 Cyl 4.0 L GAS
View related parts
Toyota 4Runner Condenser Assembly
Part Number: 88460-AZ032
$212.99 MSRP: $303.60
You Save: $90.61 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: A/C Condenser
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2023 Toyota 4Runner | 40th Anniversary Edition, Limited, Nightshade, SR5, SR5 Premium, Trail, TRD Off-Road, TRD Off-Road Premium, TRD Pro, TRD Sport, Venture | 6 Cyl 4.0 L GAS
View related parts
Toyota 4Runner Core, Cooler Condenser
Part Number: 88461-35150
$315.66 MSRP: $450.69
You Save: $135.03 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Core, Condenser; A/C Condenser
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2004 Toyota 4Runner | Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Toyota 4Runner Condenser Assembly
Part Number: 88460-60480
$252.44 MSRP: $360.43
You Save: $107.99 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: A/C Condenser; Condenser; Condenser Assembly, Cooler
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2023 Toyota 4Runner | 40th Anniversary Edition, Limited, Nightshade, SR5, SR5 Premium, Trail, TRD Off-Road, TRD Off-Road Premium, TRD Pro, TRD Sport, Venture | 6 Cyl 4.0 L GAS
View related parts
Toyota 4Runner Condenser Assembly
Part Number: 88460-60440
$281.59 MSRP: $402.05
You Save: $120.46 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: A/C Condenser; Condenser; Condenser Assembly, Cooler
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010 Toyota 4Runner | SR5 | 4 Cyl 2.7 L GAS
View related parts
Toyota 4Runner Condenser Assembly
Part Number: 88460-60430
$281.80 MSRP: $402.35
You Save: $120.55 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: A/C Condenser; Condenser; Condenser Assembly, Cooler
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2020 Toyota 4Runner | Limited, Nightshade, SR5, SR5 Premium, Trail, TRD Off-Road, TRD Off-Road Premium, TRD Pro, Venture | 6 Cyl 4.0 L GAS
View related parts
Toyota 4Runner Core, Cooler Condenser
Part Number: 88461-60090
$431.40 MSRP: $632.23
You Save: $200.83 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Core, Condenser; A/C Condenser
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004 Toyota 4Runner | Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Toyota 4Runner Condenser
Part Number: 88460-89117
Product Specifications
- Other Name: Condenser Assembly; A/C Condenser; Condenser Assembly, Cooler
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1989-1993 Toyota 4Runner | DLX, SR5 | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Toyota 4Runner Condenser Assembly
Part Number: 88461-35050
$282.62 MSRP: $403.51
You Save: $120.89 (30%)
Product Specifications
- Other Name: Core, Condenser; A/C Condenser; Condenser; Condenser Assembly, Cooler
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1996-2002 Toyota 4Runner | Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
Toyota 4Runner Condenser
Part Number: 88460-89112
Product Specifications
- Other Name: Condenser Assembly, Cooler; A/C Condenser
- Manufacturer Note: US TERRITORY SPEC
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1986-1988 Toyota 4Runner | DLX, SR5 | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Toyota 4Runner Condenser
Part Number: 88460-89110
Product Specifications
- Other Name: Condenser Assembly; A/C Condenser; Condenser Assembly, Cooler
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1984-1989 Toyota 4Runner | DLX, SR5 | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Toyota 4Runner Condenser
Part Number: 88460-35080
Product Specifications
- Other Name: Condenser Assembly; A/C Condenser; Condenser Assembly, Cooler
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1994-1995 Toyota 4Runner | SR5 | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS

Toyota 4Runner A/C Condenser

Choose genuine A/C Condenser that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM A/C Condenser for your Toyota 4Runner? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota 4Runner parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

The A/C Condenser used in the Toyota 4Runner automobiles is a heat exchanger that cools the gaseous refrigeration, and turning the refrigeration into liquid before it moves to the accumulator. Usually, it is installed at the front side of the radiator, the A/C condenser consists of a set of tubes that let it cool down. In all the generations of the 4Runner, the design of the A/C Condenser has not gone through a dramatic shift and the main areas of focus have always been efficiency and heat exchange. It is, therefore, possible that some of the variations could be of different size and or structure, but the general mode of operation of cooling and converting the refrigerant is a common feature with all the models. This in a way helps in enhancing performance of the vehicle air conditioning system that will in turn, help the passengers.

Toyota 4Runner A/C Condenser Parts and Q&A

Core, Cooler Condenser
88461-60091
Q: How to remove the A/C Condenser from the HVAC system on Toyota 4Runner?
A:
The first step to extract a condenser from an HVAC system requires the refrigeration system to be free of refrigerant. First disconnect the discharge hose sub-assembly through bolt removal and by detaching it from the cooler condenser assembly before carefully extracting the O-ring from within the cooler refrigerant discharge hose sub-assembly. The disconnected parts require vinyl tape application for moisture and foreign matter prevention at their opening. The air conditioning tube assembly disconnect process requires removing the bolt first which separates the tube from the cooler condenser assembly before removing its O-ring then using vinyl tape for sealing the opening. Remove cooler condenser cushion No. 2 by starting with cooler condenser bracket No. 1 and the nut followed by removal of 4 bolts and the cooling component cushion No. 2. To begin the procedure you should take away cooler condenser cushion No. 1 by undoing its four bolts and extracting both the bolts and cushion. Take out the cooler condenser core as the last step.
Condenser Assembly
88460-AZ016
Q: How to install an A/C Condenser on Toyota 4Runner?
A:
You should start cooler condenser installation by tightening 4 bolts on cooler condenser cushion No.1 to 5.4 Nm (55 kgf-cm, 47 in-lbf). The installation sequence starts by attaching cooler condenser cushion No. 2 through 4 bolts and a nut then torquing it to 5.4 Nm (55 kgf-cm, 47 in-lbf) and follows by screwing in cooler condenser bracket No. 1 with torquing to the same 5.4 Nm (55 kgf-cm, 47 in-lbf). The installation process of the air conditioning tube component requires stainless steel bolt torquing to 5.4 Nm (55 kgf-cm, 47 in-lbf) after installing the O-ring alongside adding compressor oil (ND-OIL 8 or equivalent) to the O-ring and pipe joint surface. Apply the same installation process to the discharge hose sub-assembly by deleting the vinyl tape then adding compressor oil to a fresh O-ring followed by O-ring installation and security of the sub-assembly to the cooler condenser with a bolt torqued to 5.4 Nm (55 kgf-cm, 47 in-lbf). The operation ends with charging the system following engine warming while checking for refrigerant leakage signs.