How to service and repair the throttle body on 2000 Toyota Tacoma?

A start point for throttle body servicing requires draining engine coolant first. Both the accelerator cable attached to the throttle body must be disconnected and automatic transmission models need throttle cable removal. Disconnecting the 2 wire clamps from the air cleaner hose along with the resonator enables smooth removal of this system from its place. The repair process requires disconnecting the throttle body after complete removal of the intake air connector and PCV hose followed by EVAP hose separation. Vehicles without the California 2RZ-FE specification need the disconnection of three EGR sensor pipes. Remove the air hose from the power steering idle-up system before disconnecting the system. Disconnection of the throttle position sensor connector and IAC valve connector should also be performed. The throttle body needs to be removed from the air intake chamber by taking out 2 bolts and 2 nuts while maintaining a 20 Nm (200 kg.cm, 14 ft.lb) torque during reassembly. New gaskets need installation while professionals should first disconnect water bypass hoses from the throttle body and then remove its original gasket. The IAC valve loses its air hose during removal of non-California-approved models. The installation process reverses the sequence which was used for removal.

OEM 2000 Toyota Tacoma Throttle Body

Fuel Injection Throttle Body

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Throttle Bodies found

View related parts
2000 Toyota Tacoma Throttle Body
Part Number: 22210-75210
$379.31 MSRP: $555.88
You Save: $176.57 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Body Assembly, Throttle
- Part Name Code: 22210
- Item Weight: 2.30 Pounds
- Item Dimensions: 12.5 x 12.6 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22210-75210
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Tacoma Submodels:
- Base, DLX, Pre Runner, SR5 | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS
View related parts
2000 Toyota Tacoma Throttle Body
Part Number: 22210-75240
$378.51 MSRP: $554.72
You Save: $176.21 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Body Assembly, Throttle
- Part Name Code: 22210
- Item Weight: 4.40 Pounds
- Item Dimensions: 9.0 x 7.7 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22210-75240
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Tacoma Submodels:
- Base, Pre Runner, SR5 | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS
View related parts
2000 Toyota Tacoma Throttle Body
Part Number: 22210-62230
Product Specifications
- Other Name: Body Assembly, Throttle
- Part Name Code: 22210
- Item Weight: 10.80 Pounds
- Item Dimensions: 10.5 x 6.3 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22210-62230
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Tacoma Submodels:
- Base, DLX, Limited, Pre Runner, SR5 | 6 Cyl 3.4 L GAS
View related parts
2000 Toyota Tacoma Throttle Body
Part Number: 22210-75220
Product Specifications
- Other Name: Body Assembly, Throttle
- Part Name Code: 22210
- Item Weight: 5.80 Pounds
- Item Dimensions: 11.3 x 8.1 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22210-75220
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Tacoma Submodels:
- Base, DLX, Pre Runner, SR5 | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS
View related parts
2000 Toyota Tacoma Throttle Body
Part Number: 22210-62250
Product Specifications
- Other Name: Body Assembly, Throttle
- Part Name Code: 22210
- Item Weight: 5.50 Pounds
- Item Dimensions: 8.8 x 7.3 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22210-62250
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Tacoma Submodels:
- Base, DLX, Limited, SR5 | 6 Cyl 3.4 L GAS
View related parts
2000 Toyota Tacoma Throttle Body
Part Number: 22210-62210
Product Specifications
- Other Name: Body Assembly, Throttle
- Part Name Code: 22210
- Item Weight: 5.30 Pounds
- Item Dimensions: 12.6 x 12.4 x 8.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22210-62210
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Tacoma Submodels:
- Base, DLX, Pre Runner, SR5, S-Runner | 6 Cyl 3.4 L GAS
View related parts
2000 Toyota Tacoma Throttle Body
Part Number: 22210-62220
Product Specifications
- Other Name: Body Assembly, Throttle
- Part Name Code: 22210
- Item Weight: 9.40 Pounds
- Item Dimensions: 13.4 x 10.3 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22210-62220
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Tacoma Submodels:
- Base, DLX, Limited, Pre Runner, SR5, S-Runner | 6 Cyl 3.4 L GAS
View related parts
2000 Toyota Tacoma Throttle Body
Part Number: 22210-62260
Product Specifications
- Other Name: Body Assembly, Throttle
- Manufacturer Note: W(*CRC)
- Part Name Code: 22210
- Item Weight: 5.30 Pounds
- Item Dimensions: 8.8 x 7.3 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22210-62260
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Tacoma Submodels:
- Base, DLX, Limited, Pre Runner, SR5, S-Runner | 6 Cyl 3.4 L GAS
View related parts
2000 Toyota Tacoma Throttle Body
Part Number: 22210-75250
Product Specifications
- Other Name: Body Assembly, Throttle; Idle Air Control Valve; Idle Control Motor; Idle Speed Control
- Part Name Code: 22210
- Item Weight: 2.50 Pounds
- Item Dimensions: 9.3 x 8.0 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22210-75250
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Tacoma Submodels:
- Base, Pre Runner, SR5 | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS
View related parts
2000 Toyota Tacoma Throttle Body
Part Number: 22210-62240
Product Specifications
- Other Name: Body Assembly, Throttle
- Manufacturer Note: MARK 62240
- Part Name Code: 22210
- Item Weight: 2.60 Pounds
- Item Dimensions: 8.7 x 7.3 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22210-62240
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Tacoma Submodels:
- Base, DLX, Pre Runner, SR5, S-Runner | 6 Cyl 3.4 L GAS

2000 Toyota Tacoma Throttle Body

Looking for affordable OEM 2000 Toyota Tacoma Throttle Body? Explore our comprehensive catalogue of genuine 2000 Toyota Tacoma Throttle Body. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2000 Toyota Tacoma Parts Questions & Experts Answers

Q: How to service and repair the throttle body on 2000 Toyota Tacoma?
A: A start point for throttle body servicing requires draining engine coolant first. Both the accelerator cable attached to the throttle body must be disconnected and automatic transmission models need throttle cable removal. Disconnecting the 2 wire clamps from the air cleaner hose along with the resonator enables smooth removal of this system from its place. The repair process requires disconnecting the throttle body after complete removal of the intake air connector and PCV hose followed by EVAP hose separation. Vehicles without the California 2RZ-FE specification need the disconnection of three EGR sensor pipes. Remove the air hose from the power steering idle-up system before disconnecting the system. Disconnection of the throttle position sensor connector and IAC valve connector should also be performed. The throttle body needs to be removed from the air intake chamber by taking out 2 bolts and 2 nuts while maintaining a 20 Nm (200 kg.cm, 14 ft.lb) torque during reassembly. New gaskets need installation while professionals should first disconnect water bypass hoses from the throttle body and then remove its original gasket. The IAC valve loses its air hose during removal of non-California-approved models. The installation process reverses the sequence which was used for removal.

Related 2000 Toyota Tacoma Parts

Alternate Year Models

1999 Toyota Tacoma Throttle Body 2001 Toyota Tacoma Throttle Body