How to service and repair the Brake Master Cylinder on 2000 Toyota Tacoma?

The first step in repairing the Brake Master Cylinder requires disconnecting the level warning switch connector. A syringe should be used to extract fluid while avoiding contact of brake fluid with painted areas since such contamination needs an immediate cleaning procedure. You should detach the five brake lines through use of Special Service Tool: 09023-00100 while applying torque to 15 Nm (155 kgf-cm, 11 ft. lbs.). The 4 nuts as well as the 3-way and check valve bracket must be removed with a 13 Nm (130 kgf-cm, 9 ft. lbs.) torque before the master cylinder can be pulled out along with its gasket. It is essential to modify the length of brake booster push rods before setup. Before use you should complete the fluid refill procedure then perform system bleeding before conducting a leak inspection. Perform the brake pedal inspection as a last step.

OEM 2000 Toyota Tacoma Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Master Cylinders found

View related parts
2000 Toyota Tacoma Master Cylinder
Part Number: 47201-04030
Product Specifications
- Other Name: Cylinder Sub-Assembly, Brake Stroke Simulator; Brake Master Cylinder; Cylinder Sub-Assembly, Brake Master
- Part Name Code: 47201
- Item Weight: 4.20 Pounds
- Item Dimensions: 12.4 x 12.1 x 10.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 47201-04030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Tacoma Submodels:
- Base, DLX, Limited, Pre Runner, SR5 | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2000 Toyota Tacoma Master Cylinder
Part Number: 47201-3D250
Product Specifications
- Other Name: Cylinder Sub-Assembly, Brake Stroke Simulator; Brake Master Cylinder; Cylinder Sub-Assembly, Brake Master
- Manufacturer Note: W(ABS)
- Part Name Code: 47201
- Item Weight: 4.00 Pounds
- Item Dimensions: 9.0 x 7.1 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 47201-3D250
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Tacoma Submodels:
- Base, DLX, Limited, Pre Runner, SR5 | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS

2000 Toyota Tacoma Brake Master Cylinder

Looking for affordable OEM 2000 Toyota Tacoma Brake Master Cylinder? Explore our comprehensive catalogue of genuine 2000 Toyota Tacoma Brake Master Cylinder. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2000 Toyota Tacoma Parts Questions & Experts Answers

Q: How to service and repair the Brake Master Cylinder on 2000 Toyota Tacoma?
A: The first step in repairing the Brake Master Cylinder requires disconnecting the level warning switch connector. A syringe should be used to extract fluid while avoiding contact of brake fluid with painted areas since such contamination needs an immediate cleaning procedure. You should detach the five brake lines through use of Special Service Tool: 09023-00100 while applying torque to 15 Nm (155 kgf-cm, 11 ft. lbs.). The 4 nuts as well as the 3-way and check valve bracket must be removed with a 13 Nm (130 kgf-cm, 9 ft. lbs.) torque before the master cylinder can be pulled out along with its gasket. It is essential to modify the length of brake booster push rods before setup. Before use you should complete the fluid refill procedure then perform system bleeding before conducting a leak inspection. Perform the brake pedal inspection as a last step.