OEM 2000 Toyota MR2 Spyder Throttle Body

2000 Toyota MR2 Spyder Parts Questions & Experts Answers

• Q: How to service and repair the throttle body on 2000 Toyota MR2 Spyder?

  A: The throttle body maintenance process starts with removing engine coolant before removing the suspension upper brace. Directly separate the VSV for EVAP from its attachment point at the air cleaner hose and disconnect the hose. After disconnecting the accelerator cable you should proceed with throttle body removal by disconnecting the throttle position sensor connector along with the IAC valve connector and the PCV hose and both water bypass hoses. Begin the throttle body repair by first removing two bolts and two nuts as well as the throttle body and the two gaskets of the intake manifold. Then detach the throttle body's two bolts and its accelerator cable bracket. Two new gaskets must be placed on the intake manifold before attaching the accelerator cable bracket to the throttle body with two bolts using torque at 30 Nm (306 kg.cm, 22 ft.lb). Secure all associated water bypass hoses and IAC valve connector together with the throttle position sensor connector and PCV hose to the throttle body. Last, replace the suspension upper brace while performing a final step of filling the radiator with engine coolant.