OEM 2000 Toyota Land Cruiser Starter Motor

2000 Toyota Land Cruiser Parts Questions & Experts Answers

• Q: How to service and repair the starter motor on 2000 Toyota Land Cruiser?

  A: Service and repair procedures for the starter motor start with V-bank cover removal and accelerator cable detachment and continue with the intake air connector uninstallation and subsequent removal of the intake manifold assembly. In order to remove the starter start by unbolting it from the cylinder block using 2 bolts then disconnect the starter from the cylinder block before separating the starter connector. The starter wire needs the removal of its bolt and nut followed by the removal of the engine wire protector bolt before you can fully detach the starter itself. The engine wire protector installation starts with attaching the bolt between the starter and protector while tightening it to 9.81 Nm (100 kg.cm, 84 in.lb). Fasten the starter wire to the nut with matching torque tension before connecting the starter connector. Attach the starter to the cylinder block while securing the engine wire with the bolt followed by starter installation using 2 bolts at 39 Nm (400 kg.cm, 29 ft.lb) torque. Reinstall the intake manifold assembly followed by the intake air connector and the accelerator cable and complete with the V-bank cover.