×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2000 Toyota Camry Fuel Pressure Regulator
Fuel Tank Pressure Regulator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Fuel Pressure Regulator found
2000 Toyota Camry Fuel Pressure Regulator
Part Number: 23280-74170$131.24 MSRP: $185.79You Save: $54.55 (30%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Regulator Assembly, Fuel; Fuel Injection Pressure Regulator; Pressure Regulator; Regulator Assembly, Fuel Pressure
- Manufacturer Note: TYPE A:REFER TO ILLUSTRATION
- Part Name Code: 23280
- Item Weight: 0.80 Pounds
- Item Dimensions: 4.8 x 4.1 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 23280-74170
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2000 Toyota Camry Fuel Pressure Regulator
Looking for affordable OEM 2000 Toyota Camry Fuel Pressure Regulator? Explore our comprehensive catalogue of genuine 2000 Toyota Camry Fuel Pressure Regulator. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2000 Toyota Camry Fuel Pressure Regulator Parts Q&A
- Q: How to service and repair the Fuel Pressure Regulator for both TYPE A and TYPE B components on 2000 Toyota Camry?A: Begin servicing and repairing the Fuel Pressure Regulator for TYPE A and TYPE B components by first unmounting the fuel pump assembly from the fuel tank then disabling the fuel filter through unscrewing until pulling it out while applying a torque of 2.0 Nm (20 kg.cm, 17 in.lb). The fuel filter requires an O-ring removal step before install where a thin gasoline coating should precede its placement on the filter. The procedure for fuel pressure regulator removal begins with unscrewing then pulling it out while applying torque at 2.0 Nm (20 kg.cm, 17 in.lb). Attention must be given to applying a light gasoline coat to the new O-ring which will be placed onto both the pressure regulator and fuel filter. The installation follows the opposite sequence of uninstallation steps.