How to service and repair the A/C Clutch on 2000 Toyota Camry?

The first step to repair and service a compressor clutch requires its complete disassembly. Remove the pressure plate through the combination of Special Service Tool: 07112-76060 and a socket wrench for shaft bolt extraction using 13.2 Nm (135 kg.cm, 9 ft.lb) torque settings. Start by applying Special Service Tool: 07112-66040 onto the pressure plate followed by utilizing the tool with Special Service Tool: 07112-76060 and a socket wrench to detach the pressure plate before removing the shims. When removing rotors use Special Service Tool: 07114-84020 to remove the snap ring while orienting the face-up orientation of the beveled side for reassembly. Remove the rotor from the shaft with a plastic hammer while protecting the pulley from getting damaged. Users must detach the stator lead wire from the compressor housing before using Special Service Tool: 07114-84020 to remove the snap ring, maintaining the beveled side at the top during reassembly steps. Finally, remove the stator. A reverse sequence of steps needs to be followed during reassembly. A dial indicator set against the pressure plate allows measurement of magnetic clutch clearance when you connect the magnetic clutch lead wire to the positive (+) battery terminal and check the position between pressure plate and rotor during negative (-) terminal connection. The security clearance between parts must fall within 0.5 plus or minus 0.15 mm (0.020 plus or minus 0.0059 in.). The standard clearance should be 0.5 plus or minus 0.15 mm (0.020 plus or minus 0.0059 in.). To reach the standard clearance measure the clearance using shims of thickness 0.1mm (0.004in.), 0.3mm (0.012 in.) and 0.5mm (0.020 in.) in any order.

OEM 2000 Toyota Camry A/C Clutch

Air Conditioning Clutch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 A/C Clutches found

View related parts
2000 Toyota Camry Clutch Assembly, Magnet
Part Number: 88410-33040
$140.28 MSRP: $198.59
You Save: $58.31 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: A/C Compressor Clutch
- Replaces: 88410-06050
- Part Name Code: 88410
- Item Weight: 4.70 Pounds
- Item Dimensions: 8.4 x 7.0 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88410-33040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Camry Submodels:
- CE, LE, SE, XLE | 6 Cyl 3.0 L GAS
View related parts
2000 Toyota Camry Clutch Coil
Part Number: 88411-02030
$138.83 MSRP: $196.53
You Save: $57.70 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Stator, Magnet Clutch; A/C Compressor Clutch Coil; Magnet; Coil; Stator Sub-Assembly, Magnet Clutch; A/C Compressor Clutch
- Replaces: 88411-2A030, 88411-22310, 88411-0C010, 88411-04010
- Part Name Code: 88302
- Item Weight: 2.00 Pounds
- Item Dimensions: 6.3 x 5.5 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88411-02030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Camry Submodels:
- CE, LE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 6 Cyl 3.0 L GAS
View related parts
2000 Toyota Camry Clutch Coil
Part Number: 88411-33030
$107.21 MSRP: $150.49
You Save: $43.28 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Stator, Magnet; A/C Compressor Clutch Coil; Clutch; Pulley; Coil; Stator Sub-Assembly, Magnet Clutch; A/C Compressor Clutch
- Replaces: 88411-07010
- Part Name Code: 88302
- Item Weight: 2.30 Pounds
- Item Dimensions: 5.8 x 5.5 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88411-33030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Camry Submodels:
- CE, LE, SE, XLE | 6 Cyl 3.0 L GAS
View related parts
2000 Toyota Camry Clutch Coil
Part Number: 88411-33050
$143.06 MSRP: $202.51
You Save: $59.45 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Stator, Magnet Clutch; A/C Compressor Clutch Coil; Coil; Stator Sub-Assembly, Magnet Clutch; A/C Compressor Clutch
- Part Name Code: 88302
- Item Weight: 2.10 Pounds
- Item Dimensions: 6.0 x 5.7 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88411-33050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Camry Submodels:
- CE, LE, XLE | 6 Cyl 3.0 L GAS
View related parts
2000 Toyota Camry Clutch
Part Number: 88410-06070
$128.65 MSRP: $182.12
You Save: $53.47 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch Assembly, Magnet; A/C Compressor Clutch
- Replaces: 88410-33100
- Part Name Code: 88410
- Item Weight: 4.90 Pounds
- Item Dimensions: 6.6 x 6.9 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88410-06070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Camry Submodels:
- CE, LE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 6 Cyl 3.0 L GAS
View related parts
2000 Toyota Camry Pulley
Part Number: 88412-06040
$253.97 MSRP: $362.61
You Save: $108.64 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor, Magnet Clutch; A/C Compressor Clutch Pulley; Rotor; Rotor Sub-Assembly, Magnet Clutch; A/C Compressor Clutch
- Replaces: 88412-2A050
- Part Name Code: 88301
- Item Weight: 2.10 Pounds
- Item Dimensions: 6.2 x 5.4 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88412-06040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Camry Submodels:
- CE, LE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 6 Cyl 3.0 L GAS
View related parts
2000 Toyota Camry Clutch
Part Number: 88412-33010
$302.47 MSRP: $431.86
You Save: $129.39 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor, Magnet Clutch; A/C Compressor Clutch Pulley; Pulley; Rotor; Rotor Sub-Assembly, Magnet Clutch; A/C Compressor Clutch
- Replaces: 88412-07010
- Part Name Code: 88301
- Item Weight: 2.10 Pounds
- Item Dimensions: 5.9 x 5.6 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88412-33010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Camry Submodels:
- CE, LE, SE, XLE | 6 Cyl 3.0 L GAS
View related parts
2000 Toyota Camry Clutch & Pulley
Part Number: 88410-33110
$661.13 MSRP: $968.89
You Save: $307.76 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch Assembly, Magnet; A/C Compressor Clutch; Clutch
- Part Name Code: 88410
- Item Weight: 4.70 Pounds
- Item Dimensions: 8.3 x 7.2 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88410-33110
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Camry Submodels:
- CE, LE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 6 Cyl 3.0 L GAS
View related parts
2000 Toyota Camry Clutch Coil
Part Number: 88411-06030
Product Specifications
- Other Name: Stator, Magnet Clutch; A/C Compressor Clutch Coil; Coil; Stator Sub-Assembly, Magnet Clutch; A/C Compressor Clutch
- Part Name Code: 88302
- Item Weight: 2.20 Pounds
- Item Dimensions: 5.9 x 5.3 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88411-06030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Camry Submodels:
- CE, LE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS
View related parts
2000 Toyota Camry Hub Sub-Assembly, Magnet Clutch
Part Number: 88403-06050
Product Specifications
- Other Name: Hub Sub-Assembly, Magnet; A/C Compressor Clutch
- Replaces: 88403-30290
- Part Name Code: 88403
- Item Weight: 1.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88403-06050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Camry Submodels:
- CE, DX, LE, SE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 6 Cyl 3.0 L GAS

2000 Toyota Camry A/C Clutch

Looking for affordable OEM 2000 Toyota Camry A/C Clutch? Explore our comprehensive catalogue of genuine 2000 Toyota Camry A/C Clutch. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2000 Toyota Camry A/C Clutch Parts Q&A

Q: How to service and repair the A/C Clutch on 2000 Toyota Camry?
A: The first step to repair and service a compressor clutch requires its complete disassembly. Remove the pressure plate through the combination of Special Service Tool: 07112-76060 and a socket wrench for shaft bolt extraction using 13.2 Nm (135 kg.cm, 9 ft.lb) torque settings. Start by applying Special Service Tool: 07112-66040 onto the pressure plate followed by utilizing the tool with Special Service Tool: 07112-76060 and a socket wrench to detach the pressure plate before removing the shims. When removing rotors use Special Service Tool: 07114-84020 to remove the snap ring while orienting the face-up orientation of the beveled side for reassembly. Remove the rotor from the shaft with a plastic hammer while protecting the pulley from getting damaged. Users must detach the stator lead wire from the compressor housing before using Special Service Tool: 07114-84020 to remove the snap ring, maintaining the beveled side at the top during reassembly steps. Finally, remove the stator. A reverse sequence of steps needs to be followed during reassembly. A dial indicator set against the pressure plate allows measurement of magnetic clutch clearance when you connect the magnetic clutch lead wire to the positive (+) battery terminal and check the position between pressure plate and rotor during negative (-) terminal connection. The security clearance between parts must fall within 0.5 plus or minus 0.15 mm (0.020 plus or minus 0.0059 in.). The standard clearance should be 0.5 plus or minus 0.15 mm (0.020 plus or minus 0.0059 in.). To reach the standard clearance measure the clearance using shims of thickness 0.1mm (0.004in.), 0.3mm (0.012 in.) and 0.5mm (0.020 in.) in any order.

Alternate Year Models

1999 Toyota Camry A/C Clutch 2001 Toyota Camry A/C Clutch