How do you service and repair the coil spring on 2000 Toyota 4Runner?

The coil spring service starts with axle housing jack-up followed by frame support using stands and axle housing maintenance with a jack in place. Start by removing the wheel while tightening the bolts to 110 Nm torque value (1,150 kgf.cm, 83 ft. lbs.). You will detach the parking brake cable bracket from the rear axle housing when using 13 Nm (130 kgf.cm, 9 ft. lbs.) torque. The rear shock absorber separation begins with bolt extraction followed by removal of washers and bushings from the rear axle housing while tightening them to 64 Nm (650 kgf.cm, 47 ft. lbs.). After this step, turn the shock absorber while pointed at the nut until the retainers and cushion alongside absorber are free at 20 Nm (200 kgf.cm, 14 ft. lbs.). Next disconnect both stabilizer bar brackets and lateral control rod from the frame structure. The coil spring removal requires lowering the rear axle housing with caution to dodge the brake line then extracting the coil spring while maintaining correct positioning of the coil spring end or reinstalling it before reassembly. The shock absorber operation needs to be checked by pushing it to make sure the pull action through the entire stroke remains smooth with no extra resistance or noise. Full compression of gas-filled shock absorbers allows you to check their smooth return speed while you will find identification markings on their outer shell. Before discarding a gas-filled shock absorber it is necessary to create a hole that measures 2 - 3 mm (0.079 - 0.118 inches) at its designated point to allow gas drainage but handle the process with care because loose pieces might become airborne while remembering that the released gas exhibits no color or odor and contains no toxic properties. Installation should be carried out following the opposite sequence of the removal process.

OEM 2000 Toyota 4Runner Coil Springs

Strut Spring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

15 Coil Springs found

View related parts
2000 Toyota 4Runner Coil Spring, Passenger Side
Part Number: 48131-35400
$165.55 MSRP: $234.35
You Save: $68.80 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Coil, Front; Coil Spring, Front Left, Front Right; Coil Spring Kit Front; Coil Spring Set; Coil Springs; Spring; Spring, Front Coil, Passenger Side
- Manufacturer Note: L=368.0,W(265/70R16 TIRE)
- Position: Passenger Side
- Replaces: 48131-35140
- Part Name Code: 48131
- Item Weight: 7.30 Pounds
- Item Dimensions: 15.8 x 7.0 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48131-35400
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota 4Runner Submodels:
- Base, Limited, SR5 | 6 Cyl 3.4 L GAS
View related parts
2000 Toyota 4Runner Coil Spring, Rear
Part Number: 48231-35210
$115.88 MSRP: $162.66
You Save: $46.78 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Coil, Rear; Coil Spring, Rear; Coil Spring Kit Rear; Coil Spring Set; Coil Springs; Spring; Spring, Coil, Rear Passenger Side; Spring, Coil, Rear Driver Side
- Manufacturer Note: W(265/70R16 TIRE)
- Position: Rear
- Item Weight: 4.00 Pounds
- Item Dimensions: 29.3 x 8.1 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48231-35210
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota 4Runner Submodels:
- Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2000 Toyota 4Runner Coil Spring, Rear
Part Number: 48231-35200
$94.67 MSRP: $132.88
You Save: $38.21 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Coil, Rear; Coil Spring, Rear, Rear Left, Rear Right; Coil Spring Kit Rear; Coil Spring Set; Coil Springs; Spring; Spring, Coil, Rear Passenger Side; Spring, Coil, Rear Driver Side
- Position: Rear
- Item Weight: 7.20 Pounds
- Item Dimensions: 31.2 x 8.3 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48231-35200
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota 4Runner Submodels:
- Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2000 Toyota 4Runner Coil Spring, Driver Side
Part Number: 48131-35340
$158.07 MSRP: $223.78
You Save: $65.71 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Coil, Front; Coil Spring, Front Left; Coil Spring Kit Front; Coil Spring Set; Coil Springs; Spring; Spring, Front Coil, Driver Side
- Manufacturer Note: L=368.0,W(265/70R16 TIRE)
- Position: Driver Side
- Part Name Code: 48132
- Item Weight: 6.80 Pounds
- Item Dimensions: 15.6 x 7.1 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48131-35340
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota 4Runner Submodels:
- Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2000 Toyota 4Runner Coil Spring, Rear
Part Number: 48231-35190
Product Specifications
- Other Name: Spring, Coil, Rear; Coil Spring, Rear, Rear Left, Rear Right; Coil Spring Kit Rear; Coil Spring Set; Coil Springs; Spring; Spring, Coil, Rear Passenger Side; Spring, Coil, Rear Driver Side
- Position: Rear
- Item Weight: 6.60 Pounds
- Item Dimensions: 16.7 x 10.8 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48231-35190
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota 4Runner Submodels:
- Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2000 Toyota 4Runner Coil Spring, Front
Part Number: 48131-35120
$147.56 MSRP: $208.88
You Save: $61.32 (30%)
Product Specifications
- Other Name: Spring, Coil, Front; Coil Spring, Front Left, Front Right; Coil Spring Set; Coil Springs; Spring; Spring, Front Coil, Passenger Side; Spring, Front Coil, Driver Side
- Manufacturer Note: L=344.0
- Position: Front
- Item Weight: 10.20 Pounds
- Item Dimensions: 15.9 x 6.9 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48131-35120
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota 4Runner Submodels:
- Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2000 Toyota 4Runner Coil Spring, Front
Part Number: 48131-35230
Product Specifications
- Other Name: Spring, Coil, Front; Coil Spring, Front Left, Front Right; Coil Spring Kit Front; Coil Spring Set; Coil Springs; Spring; Spring, Front Coil, Passenger Side; Spring, Front Coil, Driver Side
- Manufacturer Note: W(265/70R16 TIRE)
- Position: Front
- Replaces: 48131-35300
- Item Weight: 6.70 Pounds
- Item Dimensions: 16.2 x 6.8 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48131-35230
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota 4Runner Submodels:
- Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2000 Toyota 4Runner Spring, Driver Side
Part Number: 48131-35350
Product Specifications
- Other Name: Spring, Coil, Front; Coil Spring, Front Left; Coil Spring Kit Front; Coil Spring Set; Coil Springs; Spring, Front Coil, Driver Side
- Manufacturer Note: L=374.0,W(265/70R16 TIRE)
- Position: Driver Side
- Part Name Code: 48132
- Item Weight: 6.70 Pounds
- Item Dimensions: 16.2 x 7.0 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48131-35350
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota 4Runner Submodels:
- Limited, SR5 | 6 Cyl 3.4 L GAS
View related parts
2000 Toyota 4Runner Coil Spring, Passenger Side
Part Number: 48131-35330
$179.75 MSRP: $256.64
You Save: $76.89 (30%)
Product Specifications
- Other Name: Spring, Coil, Front; Coil Spring, Front Left, Front Right; Coil Spring Kit Front; Coil Spring Set; Coil Springs; Spring; Spring, Front Coil, Passenger Side
- Manufacturer Note: L=361.5,W(265/70R16 TIRE)
- Position: Passenger Side
- Replaces: 48131-35150
- Part Name Code: 48131
- Item Weight: 7.10 Pounds
- Item Dimensions: 15.9 x 6.9 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48131-35330
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota 4Runner Submodels:
- Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2000 Toyota 4Runner Coil Spring, Driver Side
Part Number: 48131-35320
Product Specifications
- Other Name: Spring, Coil, Front; Coil Spring Set; Coil Springs; Spring; Spring, Front Coil, Driver Side
- Manufacturer Note: L=351.5,W(265/70R16 TIRE)
- Position: Driver Side
- Part Name Code: 48132
- Item Weight: 7.00 Pounds
- Item Dimensions: 15.5 x 6.9 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48131-35320
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota 4Runner Submodels:
- Limited, SR5 | 6 Cyl 3.4 L GAS
View related parts
2000 Toyota 4Runner Coil Spring, Driver Side
Part Number: 48131-35290
Product Specifications
- Other Name: Spring, Coil, Front; Coil Spring, Front Left; Coil Spring Kit Front; Coil Spring Set; Coil Springs; Spring; Spring, Front Coil, Driver Side
- Manufacturer Note: L=338.0
- Position: Driver Side
- Part Name Code: 48132
- Item Weight: 10.00 Pounds
- Item Dimensions: 15.6 x 6.9 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48131-35290
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota 4Runner Submodels:
- Base, Limited, SR5 | 6 Cyl 3.4 L GAS
View related parts
2000 Toyota 4Runner Coil Spring, Front
Part Number: 48131-35110
Product Specifications
- Other Name: Spring, Coil, Front; Coil Spring, Front Left, Front Right; Coil Spring Set; Coil Springs; Spring; Spring, Front Coil, Passenger Side; Spring, Front Coil, Driver Side
- Manufacturer Note: L=327.5
- Position: Front
- Item Weight: 8.30 Pounds
- Item Dimensions: 15.9 x 7.0 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48131-35110
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota 4Runner Submodels:
- Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2000 Toyota 4Runner Coil Spring, Front
Part Number: 48131-35100
Product Specifications
- Other Name: Spring, Coil, Front; Coil Spring, Front Left, Front Right; Coil Spring Kit Front; Coil Spring Set; Coil Springs; Spring; Spring, Front Coil, Passenger Side; Spring, Front Coil, Driver Side
- Manufacturer Note: L=324.0
- Position: Front
- Item Weight: 8.60 Pounds
- Item Dimensions: 15.9 x 6.9 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48131-35100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota 4Runner Submodels:
- Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2000 Toyota 4Runner Coil Spring, Front
Part Number: 48131-35180
Product Specifications
- Other Name: Spring, Coil, Front; Coil Spring, Front Left, Front Right; Coil Spring Kit Front; Coil Spring Set; Coil Springs; Spring; Spring, Front Coil, Passenger Side; Spring, Front Coil, Driver Side
- Position: Front
- Item Weight: 6.90 Pounds
- Item Dimensions: 16.1 x 7.0 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48131-35180
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota 4Runner Submodels:
- Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2000 Toyota 4Runner Coil Spring, Front
Part Number: 48131-35310
Product Specifications
- Other Name: Spring, Coil, Front; Coil Spring Kit Front; Coil Spring Set; Coil Springs; Spring; Spring, Front Coil, Passenger Side; Spring, Front Coil, Driver Side
- Manufacturer Note: L=344.0,W(265/70R16 TIRE)
- Position: Front
- Item Weight: 7.10 Pounds
- Item Dimensions: 15.5 x 7.0 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48131-35310
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota 4Runner Submodels:
- Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS

2000 Toyota 4Runner Coil Springs

Looking for affordable OEM 2000 Toyota 4Runner Coil Springs? Explore our comprehensive catalogue of genuine 2000 Toyota 4Runner Coil Springs. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2000 Toyota 4Runner Parts Questions & Experts Answers

Q: How do you service and repair the coil spring on 2000 Toyota 4Runner?
A: The coil spring service starts with axle housing jack-up followed by frame support using stands and axle housing maintenance with a jack in place. Start by removing the wheel while tightening the bolts to 110 Nm torque value (1,150 kgf.cm, 83 ft. lbs.). You will detach the parking brake cable bracket from the rear axle housing when using 13 Nm (130 kgf.cm, 9 ft. lbs.) torque. The rear shock absorber separation begins with bolt extraction followed by removal of washers and bushings from the rear axle housing while tightening them to 64 Nm (650 kgf.cm, 47 ft. lbs.). After this step, turn the shock absorber while pointed at the nut until the retainers and cushion alongside absorber are free at 20 Nm (200 kgf.cm, 14 ft. lbs.). Next disconnect both stabilizer bar brackets and lateral control rod from the frame structure. The coil spring removal requires lowering the rear axle housing with caution to dodge the brake line then extracting the coil spring while maintaining correct positioning of the coil spring end or reinstalling it before reassembly. The shock absorber operation needs to be checked by pushing it to make sure the pull action through the entire stroke remains smooth with no extra resistance or noise. Full compression of gas-filled shock absorbers allows you to check their smooth return speed while you will find identification markings on their outer shell. Before discarding a gas-filled shock absorber it is necessary to create a hole that measures 2 - 3 mm (0.079 - 0.118 inches) at its designated point to allow gas drainage but handle the process with care because loose pieces might become airborne while remembering that the released gas exhibits no color or odor and contains no toxic properties. Installation should be carried out following the opposite sequence of the removal process.

Related 2000 Toyota 4Runner Parts

Alternate Year Models

1999 Toyota 4Runner Coil Springs 2001 Toyota 4Runner Coil Springs