2005 Toyota Sienna Airbag, Clock Spring, Air Bag Sensor

Air Bag Sensor, Airbag, Clock Spring Installation and Repair Tips for 2005 Toyota Sienna

• Q: How to replace the Rear Right Impact Sensor (Air Bag Sensor Rear RH) on 2005 Toyota Sienna?

  A: To install an Air bag systems service precautions To replace the Rear Right Impact Sensor, follow Air bag Systems service precautions. Unplug the battery, extract components required and air duct assembly. Loose the sensor connector and clear the bolts. Install the new sensor, make sure it has the right torque and connected. Playcheck and examine SRS alert light.
• Q: What steps should be taken to initialize the occupant classification ECU and check Airbag components after a collision on 2005 Toyota Sienna?

  A: Initialization of the occupant classification ECU after a collision (when either the ECU is replaced or the passenger seat is taken out). Make sure that the horn button assembly is defect-free and replace it when required. Look at Air Bag assemblies, checking them to confirm that they are intact. Check the sensors and wire harnesses and make sure that everything works as expected.
• Q: How to replace the Clock Spring Assembly / Spiral Cable on 2005 Toyota Sienna?

  A: To install the Clock Spring Assembly, first, disconnect the Battery, then the steering wheel cover, horn button and steering wheel with the help of special tools. Unhook the Air Bag connector, examine the clock spring, and replace the new assembly. Install the clock spring and connect the parts back together and clear the SRS warning light.