Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Toyota 16363-0A050
Fan Motor

2000-2004 Toyota 163630A050

Customer Questions & Expert Answers (9)
Toyota 16363-0A050 Fan Motor
  • Part Description
    Motor, Cooling Fan; Engine Cooling Fan Motor, Left, Right; Cooling Fan Assembly
  • Replaces
    16363-20090
  • Manufacturer
    Toyota
Make sure this part fits
$261.36 MSRP: $373.16
You Save: $111.80 (30%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers

  • 16363-0A050 Fan Motor is Ref No. 9 in the diagram below

    2000 Toyota Camry Fan Motor Diagram for 16363-0A050
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 16363-0A050

  • Product Specifications

    BrandGenuine Toyota
    Manufacturer Part Number16363-0A050
    Part DescriptionMotor, Cooling Fan; Engine Cooling Fan Motor, Left, Right; Cooling Fan Assembly
    Other NamesMotor; Engine Cooling Fan Motor; Cooling Fan Motor
    Item Dimensions7.6 x 6.2 x 4.8 inches
    Item Weight3.50 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces16363-20090
    ManufacturerToyota
    SKU16363-0A050
    WarrantyThis genuine Toyota part is guaranteed by Toyota's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Trim Engine
    2000-2004 Toyota AvalonXL, XLS6 Cyl 3.0 L GAS
    2000-2003 Toyota CamryLE, SE, XLE6 Cyl 3.0 L GAS
    2000-2003 Toyota SolaraSE, SLE6 Cyl 3.0 L GAS

  • Customer Questions & Expert Answers

    Q:
    Is 16363-0A050 a good match for my car? Posted by ToyotaPartsNow Specialist
    A:
    Find out if part number 16363-0A050 is the right fit for your car by Selecting Your Vehicle model.
    Posted by ToyotaPartsNow Specialist
    Q:
    How to service and repair the radiator cooling fan motor on Toyota Avalon? Posted by Customer
    A:
    The procedure for radiator cooling fan motor repair starts with No. 1 cooling fan removal after removing the battery tray and battery alongside disconnecting the cruise control and No. 3 engine room relay block. Follow this by detaching the cooling fan connector then peel off fan shroud wire clamps. Next, remove the two bolts securing the cooling fan with 5.0 Nm (50 kgf-cm, 44 inch lbs.) torque. The removal process of the No. 2 cooling fan starts with draining engine coolant before disconnecting the upper radiator hose from the radiator and the cooling fan and No. 1 ECT switch wire connectors, followed by taking off wire clamps from the fan shroud, disconnecting the No. 1 ECT switch connector and finishing by removing the two bolts that secure the cooling fan at 5.0 Nm torque (50 kgf-cm, 44 inch lbs.). The reverse sequence of removal steps is used to install the parts.
    Posted by ToyotaPartsNow Specialist
    Q:
    How to service and repair the Radiator Cooling Fan Motor on Toyota Solara? Posted by Customer
    A:
    The Radiator Cooling Fan Motor repair procedure requires first disconnecting the relay block from the Canada battery hold-down clamp followed by disconnecting the cooling fan connector and No.1 ECT switch wire connector and clamps before removing the 2 bolts that secure the cooling fan while maintaining a torque of 5.0 Nm (50 kgf-cm, 44 inch lbs.). The service requires draining engine coolant while disconnecting the upper radiator hose from the radiator and cooling fan connector as well as removing the 3 bolts from the No.2 cooling fan using a torque of 5.0 Nm (50 kgf-cm, 44 inch lbs.). The installation and disassembly of No.1 and No.2 cooling fans requires removal of the fan clip and piece followed by the motor shaft which should not experience excessive pressure or scratching. Install the new clip on the fan's opposite side from which the protrusion is located before disconnecting the lead wire from the fan shroud and removing the fan motors with their screws. The reconstruction process starts by following the exact opposite sequence that was used during original uninstallation and removal of parts.
    Posted by ToyotaPartsNow Specialist
    Q:
    What is the next step after removing the No.1 cooling fan for the 2000 Toyota Camry? Posted by Customer
    A:
    Drain the engine coolant to remove the No.2 cooling fan, disconnect the upper radiator hose from the radiator, disconnect the cooling fan connector, and remove the 3 bolts securing the cooling fan, also with a torque of 5.0 Nm (50 kgf.cm, 44 inch lbs.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Fan Motor
    Q:
    How do you secure the No.2 cooling fan for the 2001 Toyota Avalon? Posted by Customer
    A:
    Remove the 2 bolts and cooling fan, also with a torque of 5.0 Nm (50 kgf-cm, 44 inch lbs.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Fan Motor
    Q:
    What is the first step to service and repair the radiator cooling fan motors for the 2000 Toyota Camry? Posted by Customer
    A:
    Begin by removing the No.1 cooling fan by draining the engine coolant, disconnecting the upper radiator hose, and then disconnecting the cooling fan connector and ECT switch connector.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Fan Motor
    Q:
    How do you install the No.1 cooling fan for the 2001 Toyota Camry? Posted by Customer
    A:
    Attach the lower side of the cooling fan to the bracket of the radiator, install the cooling fan with the 2 bolts (Torque: 5.0 Nm (50 kgf-cm, 44 inch lbs.)), install the wire and connector holder for the ECT switch to the fan shroud, connect the cooling fan connector, and the ECT switch connector. Connect the upper radiator hose to the radiator, fill with engine coolant, start the engine, and check for coolant leaks.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Fan Motor
    Q:
    What is the first step for servicing the No.2 cooling fan for the 2000 Toyota Avalon? Posted by Customer
    A:
    Drain the engine coolant.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Fan Motor
    Q:
    What is the first step for the NO. 2 cooling fan for the 2002 Toyota Avalon? Posted by Customer
    A:
    Drain the engine coolant.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Fan Motor
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Toyota 16363-0A050, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Toyota part # 16363-0A050 Fan Motor. It is sometimes referred to as Toyota Fan Motor. OEM parts are unrivaled in terms of quality. They go through extensive quality control inspections and are produced in accordance with Toyota's official factory specifications. All of these remove defects and imperfections. So you can relax knowing they promise exceptional lifespan and flawless fitment.

ToyotaPartsNow.com is a leading supplier of genuine Toyota parts such as Toyota 163630A050 Fan Motor. At ToyotaPartsNow.com, we have a wide variety of OEM Toyota parts available at competitive prices. Our comprehensive range of genuine Toyota parts come with a manufacturer's warranty for peace of mind. We also prioritize customer satisfaction, providing a hassle-free return policy and expedited delivery for all our parts. For detailed Toyota parts information, click here.
Choose ToyotaPartsNow for discounted prices, exceptional service and fast delivery