Toyota 85801-60010
Motor Assembly, Driver Side

A service or repair of the Power Seat Motor starts with removing the front seat headrest assembly then continuing with removal of the seat track cover and inner seat track bracket cover. The first step involves removing the front seat assembly followed by the removal of the reclining power seat switch knob together with the slide and vertical power seat switch knob. Detach the front seat cushion shield assembly and the front seat inner belt assembly during the next stage. The front seat headrest support must be removed second before taking out both the front seat cushion shield inner and the front seat back board sub-assembly. First disconnect the connector to take out the separate type front seat back assembly and lumber support adjuster assembly along with removal of the two screws and adjuster.