Toyota 86101-48480
Antenna Cable, Front

Detach the antenna cord sub-assy No. 3 from the roof headlining.

Reinstall the roof headlining assembly.

Tape the No.3 radio antenna cord at the specified position on the roof headlining assembly, ensuring it is centered, then install the roof headlining assembly, television display and base (if applicable), visor holder, LH and RH visor assemblies, roof console box assembly, No.1 and No.2 room light assemblies, assist grip sub-assembly, roof side garnishes (inner LH and RH, with or without rear No. 2 seat), rear No.2 seat belt assemblies outer LH and RH (if applicable), roof side rail garnish sub-assemblies LH and RH, quarter pillar garnishes LH and RH, deck trim side panel assemblies LH and RH (with or without rear No. 2 seat), deck side trim covers (front and rear, with or without rear No. 2 seat), rope hook, rear No.1 seat belt assemblies outer LH and RH, center pillar garnishes (lower and upper LH and RH), front door opening trim weatherstrips LH and RH, rear No.2 seat assembly (if applicable), rear No.1 seat assembly LH (if applicable), seat track covers (inner and outer LH and RH, if applicable), rear seat track bracket covers (inner and outer, with or without rear No. 2 seat), jack carrier assembly, rear seat reclining covers No.2 LH and RH (if applicable), back door weatherstrip, rear floor finish plate, deck floor boxes front and rear (with or without rear No. 2 seat), deck board sub-assemblies (with or without rear No. 2 seat), tonneau cover assembly, and No.2 radio antenna cord.

Disconnect the cable from the negative battery terminal and wait 90 seconds to prevent airbag deployment.