Toyota 86101-48470
Antenna Cable, Front

Tape the antenna cord sub-assy No. 3 at the designated position on the roof headlining, ensuring that it is centered on a piece of tape measuring 100 mm x 25 mm, while avoiding contact with the adhesive side of the tape.

First, remove the roof headlining assembly.

Remove the steering wheel No.3 cover lower, steering wheel No.2 cover lower, steering pad, steering wheel assembly, steering column cover lower, steering column cover upper, headlight dimmer switch, wiper switch, instrument cluster finish panel sub-assembly center, integration control and panel assembly (with or without Navigation System), instrument panel finish panel lower, instrument cluster finish panel assembly, instrument cluster finish panel garnish, combination meter assembly, instrument panel finish panel sub-assembly lower, instrument panel insert sub-assembly lower LH, instrument cluster finish panel assembly center, floor carpet cover center LH, floor carpet cover center RH, front seat armrest assembly center, console box assembly, glove compartment door assembly, instrument panel No.2 finish panel lower, disconnect the front passenger airbag assembly connector, remove front pillar garnish LH and RH, front door scuff plates LH and RH, cowl side trim sub-assemblies LH and RH, instrument panel sub-assembly, No.2 radio antenna cord, tonneau cover assembly, deck board sub-assemblies (with or without rear No. 2 seat), deck floor boxes rear and front (with or without rear No. 2 seat), rear floor finish plate, back door weatherstrip, rear seat reclining covers No.2 LH and RH (with rear No. 2 seat), jack carrier assembly, deck side trim boxes LH and RH, rear seat track bracket covers (inner and outer, with or without rear No. 2 seat), rear No.1 seat assemblies LH and RH (with or without rear No. 2 seat), reclining hinge cover (with rear No. 2 seat), front door opening trim weatherstrips LH and RH, rear door scuff plates LH and RH (with or without rear No. 2 seat), center pillar garnishes (lower and upper LH and RH), separate front seat outer belt assemblies LH and RH, remove deck side trim covers (front and rear, with or without rear No. 2 seat), separate rear No.1 seat belt assemblies outer LH and RH, remove rope hook, deck trim side panel assemblies LH and RH (with or without rear No. 2 seat), quarter pillar garnishes LH and RH, roof side rail garnish sub-assemblies LH and RH, separate rear No.2 seat belt assemblies outer LH and RH (with rear No. 2 seat), remove roof side garnishes (inner LH and RH, with or without rear No. 2 seat), assist grip sub-assembly, No.1 and No.2 room light assemblies, roof console box assembly, LH and RH visor assemblies, visor holder, television base and display (with rear seat entertainment system), and roof headlining assembly (with or without rear No. 2 seat).

Install the instrument panel sub-assembly, cowl side trim sub-assemblies (LH and RH), front door scuff plates (LH and RH), front pillar garnishes (LH and RH), connect the front passenger airbag assembly connector, install instrument panel No.2 finish panel lower, glove compartment door assembly, console box assembly, front seat armrest assembly center, floor carpet covers (center LH and RH), instrument cluster finish panel assembly center, instrument panel insert subassembly lower LH, instrument panel finish panel subassembly lower, combination meter assembly, instrument cluster finish panel garnish, instrument cluster finish panel assembly, instrument panel finish panel lower, integration control and panel assembly (with or without Navigation System), instrument cluster finish panel sub-assembly center, wiper switch, headlight dimmer switch, steering column cover upper, steering column cover lower, steering wheel assembly, steering pad, steering wheel No.3 cover lower, steering wheel No.2 cover lower, reconnect the cable to the negative battery terminal, perform initialization for systems requiring it after disconnecting the cable, inspect the steering pad, and check the SRS warning light.