Toyota 87139-06030
Air Filter

The procedure to replace cabin air filters starts with removing the glove box screw using a Phillips-head screwdriver and following the indicated hook placement. The gloves box requires side pushing motions to unfasten the claws next in the process. First extract the filter case from the filter outlet before pulling out the filter within the case. Check the filter surface for light discoloration and replace it if necessary. Perform the opposite steps to reinstall the cabin air filter.

A person should start by detaching items from the glove compartment before starting to replace the air refiner filter. Now detach the filter cover then pull out the filter while removing it from the frame. First, install the new filter into the frame and then replace the filter back followed by securement of the filter cover. Completion of glove compartment installation should finish the procedure.

The first step for replacing the air conditioning filter is to take away the glove compartment assembly. First remove the 2 fitting claws before taking out the air filter sub assembly. Proceed by taking the filter out of the filter case and install a fresh replacement. End the process by uninstalling items according to the reverse order outlined during removal.

First, open the glove box, remove the screw with a Phillips-head screwdriver, and slide the hook. Then, push each side of the glove box to disconnect the claws and remove the filter case from the filter outlet.

Begin by opening the glove box and removing the screw with a Phillips-head screwdriver.