Other Name: Box Assembly, Console, Rear; Center Console, Center; Center Console Base; Console
Manufacturer Note: DK.GRAY,TRIM1#
Position: Rear
Replaces: 58910-52050-B0
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2007-2012 Toyota Yaris | Base, S | 4 Cyl 1.5 L GAS
Toyota Yaris Center Console Base
Choose genuine Center Console Base that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Center Console Base for your Toyota Yaris? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Yaris parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.
Q: How to install the rear Center Console Base assembly for the sedan on Toyota Yaris?
A:
Partner the 4 claws to attach the sedan rear console box assembly by using 2 bolts with 2 screws then fasten the clamp. Then install the console box carpet. To install the console upper rear panel sub-assembly connect the offered connector while using 3 clips and 3 claws for mounting it. The installation requires you to assemble first the upper console panel sub-assembly by using both clips and the claw in addition to the 5 clips. The shift lever knob should be installed on vehicles with manual transaxles. The process ends with installing the instrument panel finish panel lower center while connecting the cable to the negative battery terminal at 5.4 Nm (55 kgf-cm, 48 in-lbf) torque.
Q: How to remove the rear Center Console Base for the Sedan on Toyota Yaris?
A:
The first step for Sedan rear console box removal involves disconnecting the negative cable from the battery. The second step involves taking out the instrument panel finish panel lower center. The first step for manual transaxle removal includes uninstalling the shift lever knob sub-assembly through shift knob disassembly. Put the shift lever into position N and remove the upper console panel sub-assembly by touching off the 5 clips along with the claw. The procedure continues by separating all three clips and three claws then disconnecting the connector before pulling out the console upper rear panel sub-assembly. The start of the process involves removing the console box carpet before moving on to detach and remove the rear console box assembly with its clamp and 2 bolts and 2 screws and 4 claws until its complete extraction.