How to service and repair the power steering pump on Toyota Tundra?

The power steering pump service requires removing the air cleaner assembly through disconnecting the MAF meter connector followed by hoses and clamp removal then removing the three bolts. Secondly adjust the drive belt tension by using the drive belt tensioner to turn it in a counter-clockwise direction before removing the drive belt. The service routine for the power steering pump includes removing clips from vacuum hoses before completely disconnecting the return hose through its clip removal. The first step involves removing the union bolt along with the gasket to disconnect the pressure feed tube before proceeding to remove the two bolts, nut, stud bolt and PS vane pump assembly. Install the PS vane pump assembly first by attaching the stud bolt then tightening it to 22 Nm torque (220 kgf-cm and 16 ft. lbs.) before fastening the two bolts and nut with a torque of 44 Nm (450 kgf-cm and 33 ft. lbs.). The pressure feed tube must be attached with the stopper in contact with the PS vane pump body while adding a new gasket followed by torquing the union bolt to 46.5 Nm. Connect the return hose first using its clip and then add the vacuum hoses with their respective clips. The drive belt installation should begin with repeating the tension adjustment process before slotting back the air cleaner assembly using the air cleaner hose and three bolts followed by clamping the hoses and MAF meter connector. The power steering system requires bleeding as the last step.

OEM Toyota Tundra Power Steering Pump

Power Steering Pump Unit

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Power Steering Pumps found

View related parts
Toyota Tundra Power Steering Pump
Part Number: 44310-0C110
$275.28 MSRP: $393.04
You Save: $117.76 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly, Vane; Pump
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2013 Toyota Tundra | Base, Limited, SR5 | 8 Cyl 4.6 L GAS
View related parts
Toyota Tundra Power Steering Pump
Part Number: 44310-0C090
$269.80 MSRP: $385.21
You Save: $115.41 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly, Vane
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2021 Toyota Tundra | 1794 Edition, Base, Limited, Nightshade, Platinum, SR, SR5, Trail, TRD Pro | 8 Cyl 4.6 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Tundra Power Steering Pump
Part Number: 44310-0C040
$362.73 MSRP: $531.59
You Save: $168.86 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly, Vane
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2006 Toyota Tundra | Base, Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Tundra Power Steering Pump
Part Number: 44310-0C080
$362.73 MSRP: $531.59
You Save: $168.86 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly, Vane; Pump
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2009 Toyota Tundra | Base, Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Tundra Power Steering Pump
Part Number: 44310-0C070
$337.37 MSRP: $481.69
You Save: $144.32 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly, Vane; Pump
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2010 Toyota Tundra | Base, SR5 | 6 Cyl 4.0 L GAS
View related parts
Toyota Tundra Power Steering Pump
Part Number: 44310-0C050
$336.56 MSRP: $480.52
You Save: $143.96 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly, Vane
- Replaces: 44310-0C060
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2006 Toyota Tundra | Base, SR5 | 6 Cyl 4.0 L GAS
View related parts
Toyota Tundra Power Steering Pump
Part Number: 44310-0C010
$356.27 MSRP: $522.11
You Save: $165.84 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly, Vane
- Replaces: 44320-0C010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2004 Toyota Tundra | Base, SR5 | 6 Cyl 3.4 L GAS
View related parts
Toyota Tundra Power Steering Pump
Part Number: 44310-0C030
Product Specifications
- Other Name: Pump Assembly, Vane
- Replaces: 44320-0C020, 44320-0C030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2006 Toyota Tundra | Base, Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Tundra Power Steering Pump
Part Number: 44310-0C120
$301.49 MSRP: $430.46
You Save: $128.97 (30%)
Product Specifications
- Other Name: Pump Assembly, Vane
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2011-2014 Toyota Tundra | Base, SR, SR5 | 6 Cyl 4.0 L GAS

Toyota Tundra Power Steering Pump

If you're thinking about purchasing OEM parts for your Toyota Tundra, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Tundra Power Steering Pump at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Toyota Tundra Power Steering Pump Parts Questions & Experts Answers

Power Steering Pump
44310-0C010
Q: How to service and repair the power steering pump on Toyota Tundra?
A: The power steering pump service requires removing the air cleaner assembly through disconnecting the MAF meter connector followed by hoses and clamp removal then removing the three bolts. Secondly adjust the Drive Belt tension by using the drive belt tensioner to turn it in a counter-clockwise direction before removing the drive belt. The service routine for the power steering pump includes removing clips from vacuum hoses before completely disconnecting the return hose through its clip removal. The first step involves removing the union bolt along with the gasket to disconnect the pressure feed tube before proceeding to remove the two bolts, nut, stud bolt and PS vane pump assembly. Install the PS vane pump assembly first by attaching the stud bolt then tightening it to 22 Nm torque (220 kgf-cm and 16 ft. lbs.) before fastening the two bolts and nut with a torque of 44 Nm (450 kgf-cm and 33 ft. lbs.). The pressure feed tube must be attached with the stopper in contact with the PS vane pump body while adding a new gasket followed by torquing the union bolt to 46.5 Nm. Connect the return hose first using its clip and then add the vacuum hoses with their respective clips. The drive belt installation should begin with repeating the tension adjustment process before slotting back the air cleaner assembly using the air cleaner hose and three bolts followed by clamping the hoses and MAF meter connector. The power steering system requires bleeding as the last step.

Related Toyota Tundra Parts

Browse Toyota Tundra Power Steering Pump by Years

2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000