How to service and repair the Hood Cable Assembly on Toyota Tundra?

The service procedure for Hood Cable Assembly starts by removing the hood cable cover after unscrewing its screw and removing its cap and nut while detaching the clamp. The first step requires removing the hood lock assembly by unscrewing two bolts and a nut as well as removing the hood lock; disconnect the hood cable if available with the Theft Deterrent System. The next step requires the detachment of two claws which allows you to take out the hood lock control lever sub-assembly after disconnecting the hood cable. When removing the hood cable assembly you need a screwdriver to detach it from the clamps while taping the screwdriver tip first before pulling it from the engine room. Wires should be fed to the engine room through the grommet until the cable stopper locks before routing through the upper radiator support for clamp attachment. The installation of the hood lock lever begins when you reconnect the hood cable to its destination and fasten the 2 claws. Examine the lock sliding surfaces before coating them with MP grease then attach the hood cable and put the hood lock into position by tightening the 2 bolts and nut to 8.0 N.m (82 kgf.cm, 71 in.lbf). Lastly, install a new cap unless the vehicle has a Theft Deterrent System which requires a connector. Complete the cable cover installation by securing the clamp with screw as well as nut.

OEM Toyota Tundra Hood Cable

Hood Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

15 Hood Cables found

View related parts
Toyota Tundra Release Cable, Front
Part Number: 53630-0C030
$31.95 MSRP: $44.48
You Save: $12.53 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Hood Lock; Hood Release Cable, Front; Cable Assembly, Hood Lock Control; Hood Release Cable
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2014-2018 Toyota Tundra | 1794 Edition, Limited, Platinum, SR, SR5, TRD Pro | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Tundra Release Cable, Front
Part Number: 53630-0C020
$31.95 MSRP: $44.48
You Save: $12.53 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Hood Lock; Hood Release Cable, Front; Cable Assembly, Hood Lock Control; Hood Release Cable
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2013 Toyota Tundra | Base, Limited, Platinum, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Tundra Release Cable, Front
Part Number: 53630-0C010
$43.56 MSRP: $60.63
You Save: $17.07 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Hood Lock; Hood Release Cable, Front; Cable Assembly, Hood Lock Control; Hood Release Cable
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2006 Toyota Tundra | Base, Limited, SR5 | 6 Cyl 3.4 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Toyota Tundra Release Lever, Gray, Front
Part Number: 53601-0C010-B0
$42.60 MSRP: $59.30
You Save: $16.70 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Sub-Assembly, Hood; Hood Release Handle, Front; Release Handle; Lever Sub-Assembly, Hood Lock Control
- Manufacturer Note: GRAY,TRIM1#
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2013 Toyota Tundra | Base, Limited, Platinum, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Tundra Release Cable, Front
Part Number: 53630-0C040
$31.95 MSRP: $44.48
You Save: $12.53 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Hood Lock; Hood Release Cable, Front; Cable Assembly, Hood Lock Control
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2022-2024 Toyota Tundra | 1794 Edition, Capstone, Limited, Platinum, SR, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.4 L GAS
View related parts
Toyota Tundra Release Cable, Front
Part Number: 53630-0C031
$31.95 MSRP: $44.48
You Save: $12.53 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Hood Lock; Hood Release Cable, Front; Cable Assembly, Hood Lock Control; Hood Release Cable
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2021 Toyota Tundra | 1794 Edition, Limited, Nightshade, Platinum, SR, SR5, Trail, TRD Pro | 8 Cyl 4.6 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Tundra Release Handle, Front
Part Number: 53601-0C011-C2
$43.25 MSRP: $60.19
You Save: $16.94 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Sub-Assembly, Hood; Hood Release Handle, Front; Lever Sub-Assembly, Hood Lock Control
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2022-2024 Toyota Tundra | 1794 Edition, Capstone, Limited, Platinum, SR, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.4 L GAS
View related parts
Toyota Tundra Release Lever, Black, Front
Part Number: 53601-0C011-C0
$43.25 MSRP: $60.19
You Save: $16.94 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Sub-Assembly, Hood; Hood Release Handle, Front; Release Handle; Lever Sub-Assembly, Hood Lock Control
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2021 Toyota Tundra | 1794 Edition, Limited, Nightshade, Platinum, SR, SR5, Trail, TRD Pro | 8 Cyl 4.6 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Tundra Release Lever, Beige, Front
Part Number: 53601-0C010-E1
$42.60 MSRP: $59.30
You Save: $16.70 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Sub-Assembly, Hood; Hood Release Handle, Front; Release Handle; Lever Sub-Assembly, Hood Lock Control
- Manufacturer Note: SAND BEIGE,TRIM4#
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2013 Toyota Tundra | Base, Limited, Platinum, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Tundra Release Lever, Red, Front
Part Number: 53601-0C010-E0
$42.60 MSRP: $59.30
You Save: $16.70 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Sub-Assembly, Hood; Hood Release Handle, Front; Release Handle; Lever Sub-Assembly, Hood Lock Control
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2013 Toyota Tundra | Base, Limited, Platinum, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Tundra Release Lever, Black, Front
Part Number: 53601-0C010-C0
$42.60 MSRP: $59.30
You Save: $16.70 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Sub-Assembly, Hood; Hood Release Handle, Front; Release Handle; Lever Sub-Assembly, Hood Lock Control
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2018 Toyota Tundra | 1794 Edition, Base, Limited, Platinum, SR, SR5, TRD Pro | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Tundra Cable Handle, Front
Part Number: 53601-01020-E4
$53.89 MSRP: $75.02
You Save: $21.13 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Sub-Assembly, Hood; Hood Release Handle, Front; Release Handle; Lever; Lever Sub-Assembly, Hood Lock Control
- Manufacturer Note: SANDAL WOOD,TRIM42,43
- Position: Front
- Replaces: 53601-10020-E6
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2006 Toyota Tundra | Base, Limited, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Toyota Tundra Lever, Gray, Front
Part Number: 53601-01020-B5
$64.95 MSRP: $91.17
You Save: $26.22 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Sub-Assembly, Hood; Hood Release Handle, Front; Lever Sub-Assembly, Hood Lock Control
- Manufacturer Note: DK.GRAY,TRIM12
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2006 Toyota Tundra | Base, Limited, SR5 | 6 Cyl 3.4 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Toyota Tundra Release Handle, Front
Part Number: 53601-01020-B3
Product Specifications
- Other Name: Lever Sub-Assembly, Hood; Hood Release Handle, Front; Lever; Lever Sub-Assembly, Hood Lock Control
- Position: Front
- Replaces: 53601-10020-B3
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2002 Toyota Tundra | Base, Limited, SR5 | 6 Cyl 3.4 L GAS, 8 Cyl 4.7 L GAS
View related parts
Toyota Tundra Release Switch, Medium Gray, Front
Part Number: 53601-01020-B4
Product Specifications
- Other Name: Lever Sub-Assembly, Hood; Hood Release Handle, Front; Cable Handle; Lever; Lever Sub-Assembly, Hood Lock Control
- Position: Front
- Replaces: 53601-01020-E3
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2006 Toyota Tundra | Base, Limited, SR5 | 6 Cyl 3.4 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS

Toyota Tundra Hood Cable

If you're thinking about purchasing OEM parts for your Toyota Tundra, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Tundra Hood Cable at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Toyota Tundra Hood Cable Parts Questions & Experts Answers

Release Lever, Gray, Front
53601-0C010-B0
Q: How to service and repair the Hood Cable Assembly on Toyota Tundra?
A: The service procedure for Hood Cable Assembly starts by removing the hood cable cover after unscrewing its screw and removing its cap and nut while detaching the clamp. The first step requires removing the hood lock assembly by unscrewing two bolts and a nut as well as removing the hood lock; disconnect the hood cable if available with the Theft Deterrent System. The next step requires the detachment of two claws which allows you to take out the hood lock control lever sub-assembly after disconnecting the hood cable. When removing the hood cable assembly you need a screwdriver to detach it from the clamps while taping the screwdriver tip first before pulling it from the engine room. Wires should be fed to the engine room through the grommet until the cable stopper locks before routing through the upper radiator support for clamp attachment. The installation of the hood lock lever begins when you reconnect the hood cable to its destination and fasten the 2 claws. Examine the lock sliding surfaces before coating them with MP grease then attach the hood cable and put the hood lock into position by tightening the 2 bolts and nut to 8.0 N.m (82 kgf.cm, 71 in.lbf). Lastly, install a new cap unless the vehicle has a Theft Deterrent System which requires a connector. Complete the cable cover installation by securing the clamp with screw as well as nut.

Related Toyota Tundra Parts

Browse Toyota Tundra Hood Cable by Years

2024 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000