Other Name: Motor Sub-Assembly, Blower; HVAC Blower Motor Assembly, Rear; Blower Assembly; Motor Sub-Assembly, Blower W/Fan(For Rear); HVAC Blower Motor
Position: Rear
Replaces: 87103-0C060
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2008-2024 Toyota Sequoia | Capstone, Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
Other Name: Motor Sub-Assembly, Blower; HVAC Blower Motor Assembly, Front; Blower Assembly; Fan & Motor; Motor Sub-Assembly, Blower W/Fan; HVAC Blower Motor
Position: Front
Replaces: 87103-0C050
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2008-2022 Toyota Sequoia | Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
Other Name: Motor Sub-Assembly, Blower; HVAC Blower Motor Assembly; HVAC Blower Motor, Front; Blower Assembly; Motor Sub-Assembly, Heater Blower, W/Fan; HVAC Blower Motor
Position: Front
Replaces: 87103-0C020
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2001-2007 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS
Toyota Sequoia Blower Motor
If you're thinking about purchasing OEM parts for your Toyota Sequoia, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Sequoia Blower Motor at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.
Q: How to service and repair the blower motor on Toyota Sequoia?
A: In order to service the blower motor, the upper console panel, rear and front console boxes, lower finish panels, glove compartment door, cooling unit, and the blower unit should be removed. Disassemble the blower motor and air inlet servomotor connections and unscrew a nut and a bolt. Reinstalling through a reverse order.
Q: How to service the rear blower motor on Toyota Sequoia?
A: To service the rear blower motor, remove the rear seat outer belt anchors, rear floor mat support plate, rear door scuff plate RH, rear window side garnish assembly RH, and front quarter trim panel assembly RH. Disconnect the blower motor connector, remove three screws, and reinstall in reverse order.