Other Name: Belt, V-Ribbed; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt, V(For Fan & Alternator)
Replaces: 90916-02667
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2009-2018 Toyota RAV4 | Adventure, Base, Hybrid Limited, Hybrid SE, Hybrid XLE, LE, Limited, Platinum, SE, Sport, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS
Other Name: Belt, V-Ribbed; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt, V(For Fan & Alternator)
Manufacturer Note: MITSUBOSHI
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2013-2018 Toyota RAV4 | Adventure, Hybrid Limited, Hybrid SE, Hybrid XLE, LE, Limited, Platinum, SE, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS
Other Name: Belt, V (For Fan And Alternator); Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt, V(For Fan & Alternator)
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2003-2004 Toyota RAV4 | Base | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
Toyota RAV4 Drive Belt
If you're thinking about purchasing OEM parts for your Toyota RAV4, our website is your one-stop destination. We stock an extensive selection of genuine Toyota RAV4 Drive Belt at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.
Toyota RAV4 Drive Belt Parts Questions & Experts Answers
A: The process of servicing the drive belt starts with removing the 4 bolts from the radiator support opening cover and the front wheel RH as well as the front fender apron RH and the front suspension member reinforcement RH. Utilize Special Service Tool: 09216-42010 together with a 19 mm socket wrench to counter-clockwise loosen the V-ribbed belt tensioner arm before removing the fan and generator V belt. The installation of the Special Service Tool and associated tools should be aligned when in use while the tensioner needs to be retracted clockwise for at least 3 seconds while avoiding rapid force application. Users should never apply extra force to the tensioner after it reaches its complete retracted position. After running the same procedure for attaching the fan and generator V belt with Special Service Tool: 09216-42010, reinstall the front suspension member reinforcement RH with 4 bolts torqued to 96 Nm (989 kgf-cm, 71 ft. lbs.). Reinstallation includes the front fender apron RH followed by the front wheel RH and concluding with the radiator support opening cover.