How to install an A/C Condenser on Toyota RAV4?

The air conditioning condenser installation process starts with plier usage to put the cooler dryer in place after proper application of ND-OIL 8 or equivalent compressor oil to both surfaces between the new O-ring and cap. Then place the O-ring on the cap. A 14 mm socket hexagon wrench should be used for cap installation into the modulator with a proper torque setting at 2.9 Nm (29 kgf-cm, 25 in-lbf). Proceed to the installation of the cooler condenser assembly then secure the No. 2 fan shroud with 2 bolts at a torque of 10.5 Nm (107 kgf-cm, 8 ft-lbf). Use 2 bolts to attach the radiator support upper bracket and tighten them to 45 Nm (459 kgf-cm, 33 ft-lbf). Before installing a new condenser users must fill it with 40 cc (1.4 fl. oz.) ND-OIL 8 or equivalent compressor oil. To assemble the cooler refrigerant liquid pipe you must first remove existing vinyl tape before applying ND-OIL 8 or equivalent compressor oil onto a new O-ring as well as onto the fitting surface. Install the O-ring and bolt the pipe securely to the cooler condenser with a torque of 9.8 Nm (100 kgf-cm, 7 ft-lbf). Secure the No. 1 cooler hydrogen discharge hose by applying proper oil while tightening it with a bolt at 100 kgf-cm torque. Put the hood sub-assembly to the required position before mounting the front bumper cover then connect the negative battery cable and perform refrigerant charging followed by engine heating and inspect all coolant lines for leakage.

How to remove the A/C Condenser on Toyota RAV4?

The process to remove the HVAC condenser begins with refrigerant discharge from the refrigeration system followed by disconnecting the negative battery cable until a minimum 90-second period elapses to avoid Air Bag pretensioner and seat pretensioner activation. Begin by taking off the bumper cover on the front side before separating the No. 1 cooler refrigerant discharge hose through bolt deletion and hose detachment. Then remove the O-ring from the assembly. Apply vinyl tape to seal off the open ends of disconnected components in order to shield them from moisture and foreign substances. To disconnect the cooler refrigerant liquid pipe you must first remove the bolt followed by the pipe which enables inspection of the O-ring before sealing all openings with vinyl tape. First disconnect the radiator support upper bracket by removing its two bolts with attached brackets before removing the No. 2 fan shroud through its two bolts. To finish the process remove the cooler condenser assembly and the cooler dryer by extracting the modulator's cap using a 14 mm socket hexagon wrench then take out the O-ring from the cap before using pliers to detach the cooler dryer.

OEM Toyota RAV4 A/C Condenser

Air Conditioning Condenser

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

15 A/C Condensers found

View related parts
Toyota RAV4 Condenser
Part Number: 88460-42090
$128.76 MSRP: $181.97
You Save: $53.21 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser Assembly; A/C Condenser; Condenser Assembly, Cooler
- Replaced by: 88460-AZ031
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2005 Toyota RAV4 | Base, L, Sport | 4 Cyl 2.4 L GAS
View related parts
Toyota RAV4 Condenser Assembly
Part Number: 884A0-33020
$289.61 MSRP: $413.49
You Save: $123.88 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser Assembly, Support; A/C Condenser; Condenser; Condenser Assembly, Cooler
- Manufacturer Note: REFER86-17:PNC86466D
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2022 Toyota RAV4 | Adventure, LE, Limited, TRD Off-Road, XLE, XLE Premium | 4 Cyl 2.5 L GAS
View related parts
Toyota RAV4 Condenser Assembly
Part Number: 884A0-06020
$294.73 MSRP: $420.81
You Save: $126.08 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser Assembly, Support; A/C Condenser; Condenser; Condenser Assembly, Cooler
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2022 Toyota RAV4 | Adventure, LE, Limited, TRD Off-Road, XLE, XLE Premium | 4 Cyl 2.5 L GAS
View related parts
Toyota RAV4 Condenser Assembly
Part Number: 88460-0R030
$314.82 MSRP: $449.48
You Save: $134.66 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: A/C Condenser; Condenser; Condenser Assembly, Cooler
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2013-2018 Toyota RAV4 | Adventure, Hybrid Limited, Hybrid SE, Hybrid XLE, LE, Limited, Platinum, SE, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS
View related parts
Toyota RAV4 Condenser
Part Number: 88460-AZ031
$128.76 MSRP: $181.97
You Save: $53.21 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser Assembly; A/C Condenser
- Replaces: 88460-42090
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2005 Toyota RAV4 | Base, L, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Toyota RAV4 Condenser Assembly
Part Number: 88460-AZ017
$138.59 MSRP: $195.88
You Save: $57.29 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: A/C Condenser
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2006-2012 Toyota RAV4 | Base, Limited, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota RAV4 Condenser Assembly
Part Number: 884A0-42070
$282.45 MSRP: $403.29
You Save: $120.84 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser Assembly, Support; A/C Condenser; Condenser; Condenser Assembly, Cooler
- Manufacturer Note: REFER86-17:PNC86466D
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2022-2023 Toyota RAV4 | Hybrid LE, Hybrid Limited, Hybrid SE, Hybrid XLE, Hybrid XLE Premium, Hybrid XSE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota RAV4 Condenser Assembly
Part Number: 884A0-42060
$282.45 MSRP: $403.29
You Save: $120.84 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser Assembly, Support; A/C Condenser; Condenser; Condenser Assembly, Cooler
- Manufacturer Note: REFER86-17:PNC86466D
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2022-2023 Toyota RAV4 | Adventure, LE, Limited, TRD Off-Road, XLE, XLE Premium | 4 Cyl 2.5 L GAS
View related parts
Toyota RAV4 Condenser Assembly
Part Number: 884A0-42040
$289.61 MSRP: $413.48
You Save: $123.87 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser Assembly, Support; A/C Condenser; Condenser; Condenser Assembly, Cooler
- Manufacturer Note: REFER86-17:PNC86466D
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2022 Toyota RAV4 | Hybrid LE, Hybrid Limited, Hybrid SE, Hybrid XLE, Hybrid XLE Premium, Hybrid XSE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota RAV4 Condenser Assembly
Part Number: 884A0-0R040
$255.95 MSRP: $365.43
You Save: $109.48 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser Assembly, Support; A/C Condenser; Condenser; Condenser Assembly, Cooler
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2022-2023 Toyota RAV4 | Hybrid LE, Hybrid Limited, Hybrid SE, Hybrid XLE, Hybrid XLE Premium, Hybrid XSE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota RAV4 Condenser Assembly
Part Number: 884A0-0R030
$254.75 MSRP: $363.72
You Save: $108.97 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser Assembly, Support; A/C Condenser; Condenser; Condenser Assembly, Cooler
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2022-2023 Toyota RAV4 | Adventure, LE, Limited, TRD Off-Road, XLE, XLE Premium | 4 Cyl 2.5 L GAS
View related parts
Toyota RAV4 Condenser Assembly
Part Number: 88460-42150
$195.59 MSRP: $279.25
You Save: $83.66 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: A/C Condenser; Condenser; Condenser Assembly, Cooler
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2016-2018 Toyota RAV4 | Hybrid Limited, Hybrid SE, Hybrid XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota RAV4 Condenser
Part Number: 88460-42021
$281.69 MSRP: $402.19
You Save: $120.50 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser Assembly; A/C Condenser; Condenser Assembly, Cooler
- Manufacturer Note: DEALER OPTION
- Replaces: 88460-42020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1996-2000 Toyota RAV4 | Base | 4 Cyl 2.0 L GAS
View related parts
Toyota RAV4 Condenser Assembly
Part Number: 88460-0R011
$310.02 MSRP: $442.64
You Save: $132.62 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: A/C Condenser; Condenser, Air Conditioning; Condenser; Condenser Assembly, Cooler
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2006-2012 Toyota RAV4 | Base, Limited, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota RAV4 Condenser
Part Number: 88460-42070
Product Specifications
- Other Name: Condenser Assembly; A/C Condenser; Condenser, Air Conditioning; Condenser Assembly, Cooler
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2003 Toyota RAV4 | Base | 4 Cyl 2.0 L GAS

Toyota RAV4 A/C Condenser

Choose genuine A/C Condenser that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM A/C Condenser for your Toyota RAV4? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota RAV4 parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

In Toyota RAV4, the A/C Condenser is a heat exchanger plays an important role when it comes to cooling the gaseous refrigerant and converting this to a liquid before movement to the next stage, the accumulator. Generally mounted just below or in front of the radiator, the A/C Condenser is a series of tubes through which this occurs. Different year RAV4 may have incorporated different styles of A/C Condenser although specific type is not described. The first concern however is similar in all these variations and once again the intended action is proper cooling of the refrigerant so as to attain the prime ac conditions. The performance of the A/C Condenser is critical especially in achieving the right cabin comfort in the RAV4.

Toyota RAV4 A/C Condenser Parts and Q&A

Condenser Assembly
88460-0R011
Q: How to install an A/C Condenser on Toyota RAV4?
A:
The air conditioning condenser installation process starts with plier usage to put the cooler dryer in place after proper application of ND-OIL 8 or equivalent compressor oil to both surfaces between the new O-ring and cap. Then place the O-ring on the cap. A 14 mm socket hexagon wrench should be used for cap installation into the modulator with a proper torque setting at 2.9 Nm (29 kgf-cm, 25 in-lbf). Proceed to the installation of the cooler condenser assembly then secure the No. 2 fan shroud with 2 bolts at a torque of 10.5 Nm (107 kgf-cm, 8 ft-lbf). Use 2 bolts to attach the radiator support upper bracket and tighten them to 45 Nm (459 kgf-cm, 33 ft-lbf). Before installing a new condenser users must fill it with 40 cc (1.4 fl. oz.) ND-OIL 8 or equivalent compressor oil. To assemble the cooler refrigerant liquid pipe you must first remove existing vinyl tape before applying ND-OIL 8 or equivalent compressor oil onto a new O-ring as well as onto the fitting surface. Install the O-ring and bolt the pipe securely to the cooler condenser with a torque of 9.8 Nm (100 kgf-cm, 7 ft-lbf). Secure the No. 1 cooler hydrogen discharge hose by applying proper oil while tightening it with a bolt at 100 kgf-cm torque. Put the hood sub-assembly to the required position before mounting the front bumper cover then connect the negative battery cable and perform refrigerant charging followed by engine heating and inspect all coolant lines for leakage.
Condenser Assembly
88460-AZ017
Q: How to remove the A/C Condenser on Toyota RAV4?
A:
The process to remove the HVAC condenser begins with refrigerant discharge from the refrigeration system followed by disconnecting the negative battery cable until a minimum 90-second period elapses to avoid Air Bag pretensioner and seat pretensioner activation. Begin by taking off the bumper cover on the front side before separating the No. 1 cooler refrigerant discharge hose through bolt deletion and hose detachment. Then remove the O-ring from the assembly. Apply vinyl tape to seal off the open ends of disconnected components in order to shield them from moisture and foreign substances. To disconnect the cooler refrigerant liquid pipe you must first remove the bolt followed by the pipe which enables inspection of the O-ring before sealing all openings with vinyl tape. First disconnect the radiator support upper bracket by removing its two bolts with attached brackets before removing the No. 2 fan shroud through its two bolts. To finish the process remove the cooler condenser assembly and the cooler dryer by extracting the modulator's cap using a 14 mm socket hexagon wrench then take out the O-ring from the cap before using pliers to detach the cooler dryer.