How to service and repair the steering wheel on Toyota MR2 Spyder?

Begin repairing the steering wheel by removing the steering wheel pad followed by the steering wheel then column lower cover and lastly the spiral cable. Further installation steps include placing the spiral cable before the upper and lower column covers and then attaching the cluster finish panel followed by reinstallation of the steering wheel and its pad.

How to address a steering wheel that is off center on Toyota MR2 Spyder?

The first step to correct steering wheel misalignment involves putting masking tape at the top center points of both steering wheel and steering column upper cover. The driver should travel 100-meters forward in a straight path at 35 mph (56 km/h) before steering using the wheel. Place masking tape and draw a line after positioning the steering wheel straight ahead by using the upper surfaces of the wheel and spoke together with the SRS Air Bag reference. Use the masking tape to draw a new line then measure the screen distance that equals to 1 degrees by converting each 1 mm (0.04 inch) measurement to this angle. To perform adjustments first place identification marks on visible points of the RH and LH tie rod ends and rack ends. Then measure screw-to-end distances while recording these measurements. A technician should remove both rack boots' RH and LH clips before loosening their lock nuts and moving the rack ends 12 degrees through the same number of turns in opposite directions. Each 360 degrees rotation of the rack end produces 1.5 mm (0.059 in.) horizontal translation which results in a 12 degrees steering angle. Complete the procedure by retightening both lock nuts to 55 Nm (560 kgf-cm, 41 ft. lbs.) while maintaining the 1.5 mm (0.059 inch) distance tolerance between tie rod ends and rack end screws. Place boot clips back onto their respective locations.

OEM Toyota MR2 Spyder Steering Wheel

Navigation Steering Wheel

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Steering Wheels found

View related parts
Toyota MR2 Spyder Steering Wheel
Part Number: 45100-2B741-C0
$886.80 MSRP: $1299.62
You Save: $412.82 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Wheel Assembly, Steering
- Manufacturer Note: 3-SPOKE,LEATHER,W(CRUISE CONTROL),BLACK,TRIM2#
- Replaces: 45100-2B740-C0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2005 Toyota MR2 Spyder | Base | 4 Cyl 1.8 L GAS
View related parts
Toyota MR2 Spyder Steering Wheel, Red
Part Number: 45100-2B741-C2
$885.74 MSRP: $1298.07
You Save: $412.33 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Wheel Assembly, Steering
- Manufacturer Note: 3-SPOKE,LEATHER,RED,TRIM30
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005 Toyota MR2 Spyder | Base | 4 Cyl 1.8 L GAS
View related parts
Toyota MR2 Spyder Steering Wheel
Part Number: 45100-2B690-C3
$708.57 MSRP: $1038.42
You Save: $329.85 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Wheel Assembly, Steering
- Manufacturer Note: 3-SPOKE,LEATHER,BLACK,TRIM10,20,30,40
- Replaces: 45100-2B690-C2
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2005 Toyota MR2 Spyder | Base | 4 Cyl 1.8 L GAS
View related parts
Toyota MR2 Spyder Steering Wheel
Part Number: 45100-2B690-C1
$726.82 MSRP: $1065.16
You Save: $338.34 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Wheel Assembly, Steering
- Manufacturer Note: 3-SPOKE,LEATHER,GRAY,TRIM10,20,30,40
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005 Toyota MR2 Spyder | Base | 4 Cyl 1.8 L GAS
View related parts
Toyota MR2 Spyder Steering Wheel
Part Number: 45100-2B731-C0
Product Specifications
- Other Name: Wheel Assembly, Steering
- Replaces: 45100-2B730-C0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2002 Toyota MR2 Spyder | Base | 4 Cyl 1.8 L GAS
View related parts
Toyota MR2 Spyder Steering Wheel, Black
Part Number: 45100-2B741-C3
Product Specifications
- Other Name: Wheel Assembly, Steering
- Manufacturer Note: 3-SPOKE,LEATHER,BLACK,TRIM10,2#,30,4#
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005 Toyota MR2 Spyder | Base | 4 Cyl 1.8 L GAS
View related parts
Toyota MR2 Spyder Steering Wheel, Gray
Part Number: 45100-2B741-C1
Product Specifications
- Other Name: Wheel Assembly, Steering
- Manufacturer Note: 3-SPOKE,LEATHER,GRAY,TRIM10
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005 Toyota MR2 Spyder | Base | 4 Cyl 1.8 L GAS

Toyota MR2 Spyder Steering Wheel

Choose genuine Steering Wheel that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Steering Wheel for your Toyota MR2 Spyder? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota MR2 Spyder parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

Customers who want a reliable steering wheel that delivers Toyota-brand performance quality should consider the Toyota MR2 Spyder model. This steering wheel serves MR2 Spyder models from 1999 to 2007 to improve driver control and responsiveness which delivers exceptional driving excitement. The steering wheel fits all MR2 Spyder versions from the B trim level through Standard and up to the S level so it serves multiple functions for optimal performance. The Toyota MR2 Spyder Steering Wheel functions using hydraulic as well as electric power steering systems creating better efficiency while enhancing safety throughout each drive. Steering wheel maintenance and proper replacement at the right time proves essential for avoiding vibrations and stiffness issues which later reduce control over the vehicle. The car stands out because of its lightweight construction and agile steering performance which benefits greatly from this steering wheel design. Enthusiasts favor the Toyota MR2 Spyder Steering Wheel because it features an ergonomic design combined with responsive feedback resulting in market-leading special features. Touring the Toyota model part endorses the automaker's dedication to superior quality and driving performance while establishing itself as a recommended sports car option for enthusiasts.

Toyota MR2 Spyder Steering Wheel Parts and Q&A

Steering Wheel
45100-2B690-C3
Q: How to service and repair the steering wheel on Toyota MR2 Spyder?
A:
Begin repairing the steering wheel by removing the steering wheel pad followed by the steering wheel then column lower cover and lastly the spiral cable. Further installation steps include placing the spiral cable before the upper and lower column covers and then attaching the cluster finish panel followed by reinstallation of the steering wheel and its pad.
Steering Wheel
45100-2B741-C0
Q: How to address a steering wheel that is off center on Toyota MR2 Spyder?
A:
The first step to correct steering wheel misalignment involves putting masking tape at the top center points of both steering wheel and steering column upper cover. The driver should travel 100-meters forward in a straight path at 35 mph (56 km/h) before steering using the wheel. Place masking tape and draw a line after positioning the steering wheel straight ahead by using the upper surfaces of the wheel and spoke together with the SRS Air Bag reference. Use the masking tape to draw a new line then measure the screen distance that equals to 1 degrees by converting each 1 mm (0.04 inch) measurement to this angle. To perform adjustments first place identification marks on visible points of the RH and LH tie rod ends and rack ends. Then measure screw-to-end distances while recording these measurements. A technician should remove both rack boots' RH and LH clips before loosening their lock nuts and moving the rack ends 12 degrees through the same number of turns in opposite directions. Each 360 degrees rotation of the rack end produces 1.5 mm (0.059 in.) horizontal translation which results in a 12 degrees steering angle. Complete the procedure by retightening both lock nuts to 55 Nm (560 kgf-cm, 41 ft. lbs.) while maintaining the 1.5 mm (0.059 inch) distance tolerance between tie rod ends and rack end screws. Place boot clips back onto their respective locations.