What steps should be taken to inspect and repair the seat belt system after a collision on Toyota MR2 Spyder?

Seat belt system examination and repair must happen right after an accident. When the seat belt assembly receives severe impacts then you must replace all components starting from the outer belt and inner belt with added bolts and nuts regardless of visual appearance. When the pretensioner remains unactivated run an appropriate system check and do a visual assessment for quarter trim panel damage and wire harness damage and connector damage while inspecting the center floor No.3 crossmember for distortion. A diagnostic system check follows pretensioner activation while inspecting identical components especially checking if the center floor No.3 crossmember shows deformation and the connector and wire harness show any damage. The pretensioner needs replacement in cases when it activates or shows faults during testing or if the front seat outer belt fails diagnostic testing or exists in a dropped state. Use the proper steps to uninstall and reassemble the seat belt pretensioner system.

OEM Toyota MR2 Spyder Seat Belt

Seat Safety Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Seat Belts found

View related parts
Toyota MR2 Spyder Buckle, Black, Driver Side
Part Number: 73230-20761-C0
$43.25 MSRP: $60.20
You Save: $16.95 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Assembly, Front Seat; Seat Belt Receptacle, Front Left; Latch; Belt Assembly, Front Seat Inner, Driver Side
- Position: Driver Side
- Replaces: 73230-20761-B0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2002-2005 Toyota MR2 Spyder | Base | 4 Cyl 1.8 L GAS
View related parts
Toyota MR2 Spyder Buckle, Driver Side
Part Number: 73230-20760-C0
$38.40 MSRP: $53.44
You Save: $15.04 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Assembly, Front Seat; Seat Belt Receptacle, Front Left; Latch; Belt Assembly, Front Seat Inner, Driver Side
- Position: Driver Side
- Replaces: 73230-20760-B0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2001 Toyota MR2 Spyder | Base | 4 Cyl 1.8 L GAS
View related parts
Toyota MR2 Spyder Buckle, Passenger Side
Part Number: 73230-2B011-C0
Product Specifications
- Other Name: Belt Assembly, Front Seat; Seat Belt Receptacle, Front Right; Latch; Belt Assembly, Front Seat Inner, Passenger Side
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2002-2005 Toyota MR2 Spyder | Base | 4 Cyl 1.8 L GAS
View related parts
Toyota MR2 Spyder Buckle, Passenger Side
Part Number: 73230-2B010-C0
Product Specifications
- Other Name: Belt Assembly, Front Seat; Seat Belt Receptacle, Front Right; Latch; Belt Assembly, Front Seat Inner, Passenger Side
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2001 Toyota MR2 Spyder | Base | 4 Cyl 1.8 L GAS
View related parts
Toyota MR2 Spyder Lap & Shoulder Belt, Driver Side
Part Number: 73220-17240-C0
Product Specifications
- Other Name: Belt Assembly, Front Seat; Seat Belt Lap and Shoulder Belt, Front Left; Belt & Retractor; Belt Assembly, Front Seat Outer, Driver Side
- Manufacturer Note: BLACK,TRIM1#,2#,3#,4#
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2005 Toyota MR2 Spyder | Base | 4 Cyl 1.8 L GAS
View related parts
Toyota MR2 Spyder Lap & Shoulder Belt, Driver Side
Part Number: 73220-17161-C0
Product Specifications
- Other Name: Belt Assembly, Front Seat; Seat Belt Lap and Shoulder Belt, Front Left; Belt & Retractor; Belt Assembly, Front Seat Outer, Driver Side
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2002-2003 Toyota MR2 Spyder | Base | 4 Cyl 1.8 L GAS
View related parts
Toyota MR2 Spyder Lap & Shoulder Belt, Driver Side
Part Number: 73220-17160-C0
Product Specifications
- Other Name: Belt Assembly, Front Seat; Seat Belt Lap and Shoulder Belt, Front Left; Belt & Retractor; Belt Assembly, Front Seat Outer, Driver Side
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2001 Toyota MR2 Spyder | Base | 4 Cyl 1.8 L GAS
View related parts
Toyota MR2 Spyder Lap & Shoulder Belt, Passenger Side
Part Number: 73210-17250-C0
Product Specifications
- Other Name: Belt Assembly, Front Seat; Seat Belt Lap and Shoulder Belt, Front Right; Belt & Retractor; Belt Assembly, Front Seat Outer, Passenger Side
- Manufacturer Note: BLACK,TRIM1#,2#,3#,4#
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2005 Toyota MR2 Spyder | Base | 4 Cyl 1.8 L GAS
View related parts
Toyota MR2 Spyder Lap & Shoulder Belt, Passenger Side
Part Number: 73210-17181-C0
Product Specifications
- Other Name: Belt Assembly, Front Seat; Seat Belt Lap and Shoulder Belt, Front Right; Belt & Retractor; Belt Assembly, Front Seat Outer, Passenger Side
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2002-2003 Toyota MR2 Spyder | Base | 4 Cyl 1.8 L GAS
View related parts
Toyota MR2 Spyder Lap & Shoulder Belt, Passenger Side
Part Number: 73210-17180-C0
Product Specifications
- Other Name: Belt Assembly, Front Seat; Seat Belt Lap and Shoulder Belt, Front Right; Belt & Retractor; Belt Assembly, Front Seat Outer, Passenger Side
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2001 Toyota MR2 Spyder | Base | 4 Cyl 1.8 L GAS

Toyota MR2 Spyder Seat Belt

Choose genuine Seat Belt that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Seat Belt for your Toyota MR2 Spyder? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota MR2 Spyder parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

Safety and performance excellence in Toyota vehicles shows through the Toyota MR2 Spyder Seat Belt which maintains a central role in the vehicle. The automobile designer specifically built this seat belt for MR2 Spyder use with a frame of strong polyester webbing that integrates both a secure buckle and tongue mechanism together with a dependable retractor system to protect users in both collisions and sudden stopping situations. The Toyota MR2 Spyder Seat Belt improves safety by reducing harmful movement and ejection yet it serves importantly to position occupants properly before airbags deploy and minimize injuries. The Toyota MR2 Spyder Seat Belt continues to serve users from 1999 to 2007 model years delivering enhanced driver and passenger safety in line with modern automotive standards. Users can rely on this product due to its efficient design because it immediately activates its webbing retention mechanism to provide optimized protective measures. The Toyota MR2 Spyder Seat Belt distinctive feature in the automotive market consists of perfectly integrated safety features which combine safety protection with enhanced driver experience. As part of its many great features including reliability and advanced safety capabilities the Toyota MR2 Spyder Seat Belt remains an essential part of what makes the the automaker model such a legendary convertible sports car.

Toyota MR2 Spyder Seat Belt Parts and Q&A

Buckle, Driver Side
73230-20760-C0
Q: What steps should be taken to inspect and repair the seat belt system after a collision on Toyota MR2 Spyder?
A:
Seat belt system examination and repair must happen right after an accident. When the seat belt assembly receives severe impacts then you must replace all components starting from the outer belt and inner belt with added bolts and nuts regardless of visual appearance. When the pretensioner remains unactivated run an appropriate system check and do a visual assessment for quarter trim panel damage and wire harness damage and connector damage while inspecting the center floor No.3 crossmember for distortion. A diagnostic system check follows pretensioner activation while inspecting identical components especially checking if the center floor No.3 crossmember shows deformation and the connector and wire harness show any damage. The pretensioner needs replacement in cases when it activates or shows faults during testing or if the front seat outer belt fails diagnostic testing or exists in a dropped state. Use the proper steps to uninstall and reassemble the seat belt pretensioner system.

Related Toyota MR2 Spyder Parts

Browse Toyota MR2 Spyder Seat Belt by Years

2005 2004 2003 2002 2001 2000