How to install the Fuel Level Sensor RH assembly on Toyota Matrix?

The 4WD fuel level sensor gauge RH assembly installation requires using 5 bolts to attach it to the fuel tank with 1.5 Nm (15 kgf-cm, 13 in-lbf) torque then connecting the fuel level sensor gauge connector. You should position the 4WD fuel level sensor gauge assembly downward and avoid contact between the wire harness and avoid deforming the fuel level sensor gauge arm. The 2WD fuel level sensor gauge assembly must also be slid down before connecting its connector and verifying that the fuel level sensor gauge arm holds a direct position. The following step requires the installation of the fuel suction tube assembly to the fuel tank assembly. Check for fuel leaking while connecting the cable to the negative terminal of the battery. For the 4WD installation finish with the No. 2 rear floor service hole cover.

How to replace a Fuel Level Sensor on Toyota Matrix?

The first step to remove the fuel level sensor is draining fuel system pressure. The elimination of power starts by disconnecting the negative battery cable. You should detach the fuel suction tube assembly from the fuel tank assembly. The 4WD models require users to disconnect their fuel level sensor connector without damaging the wire harness before releasing the lock and drawing out the fuel level sensor assembly with attention to avoid damage between the fuel level sensor arm and tank. The 2WD model will require exactly the same service steps that the 4WD model uses. The No. 2 rear floor service hole cover should be removed for 4WD before disconnecting the fuel level sensor connector and removing all 5 bolts from the fuel level sensor RH assembly while taking care to protect the arm from bending.

OEM Toyota Matrix Fuel Level Sensor

Gas Gauge Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Fuel Level Sensors found

View related parts
Toyota Matrix Fuel Gauge Sending Unit
Part Number: 83320-02050
$96.68 MSRP: $135.71
You Save: $39.03 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gage Assembly, Fuel Sender; Hanger Assembly; Pump Module; Tank Sending Unit; Level Sensor; Sending Unit
- Replaces: 83320-12640
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2004 Toyota Matrix | Base, XR, XRS | 4 Cyl 1.8 L GAS
View related parts
Toyota Matrix Fuel Gauge Sending Unit
Part Number: 83320-02010
$77.37 MSRP: $108.61
You Save: $31.24 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gage Assembly, Fuel Sender; Fuel Tank Sending Unit; Fuel Pump Module; Fuel Level Sensor; Sending Unit; Level Indicator; Tank Sending Unit
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2013 Toyota Matrix | Base, S, XR, XRS | 4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS
View related parts
Toyota Matrix Fuel Gauge Sending Unit, Driver Side
Part Number: 83320-02090
$84.24 MSRP: $118.25
You Save: $34.01 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gage Assembly, Fuel Sender; Hanger Assembly, Left; Fuel Level Sensor; Level Indicator
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2013 Toyota Matrix | Base, S, XRS | 4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS
View related parts
Toyota Matrix Fuel Gauge Sending Unit
Part Number: 83320-01040
$96.33 MSRP: $135.21
You Save: $38.88 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gage Assembly, Fuel Sender; Fuel Tank Sending Unit; Fuel Pump Module Assembly; Fuel Level Sensor; Fuel Sending Unit; Sending Unit; Tank Sending Unit
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2006 Toyota Matrix | Base, XR, XRS | 4 Cyl 1.8 L GAS
View related parts
Toyota Matrix Fuel Gauge Sending Unit
Part Number: 83320-01030
$75.47 MSRP: $105.94
You Save: $30.47 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gage Assembly, Fuel Sender; Fuel Tank Sending Unit; Fuel Level Sensor; Fuel Sending Unit; Sending Unit; Tank Sending Unit
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2004 Toyota Matrix | Base, XR, XRS | 4 Cyl 1.8 L GAS
View related parts
Toyota Matrix Fuel Gauge Sending Unit, Passenger Side
Part Number: 83320-09130
$84.60 MSRP: $118.75
You Save: $34.15 (29%)
Product Specifications
- Other Name: Gage Assembly, Fuel Sender; Right Fuel Sender & Hanger Assembly; Right Fuel Tank Sending Unit; Fuel Level Sensor; Level Indicator
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2013 Toyota Matrix | Base, S, XRS | 4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS

Toyota Matrix Fuel Level Sensor

Choose genuine Fuel Level Sensor that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Fuel Level Sensor for your Toyota Matrix? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Matrix parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

The Fuel Level Sensor in Toyota Matrix cars is assigned a basic but crucial role of determining the amount of fuel contained in the tank so that the driver is informed about when to get a refill. This electronic device is designed to work perfectly well in high temperatures, and can provide accurate reading with less power intensity. This is usually mounted inside the fuel tank and includes a float, an actuating rod as well as a resistor through which it sends signals to the fuel gauge. Despite the lack of different types or styles used in various Matrix models in the overview part, the author stresses that if this component is faulty, it can give a wrong level indication after refueling - full tank, for instance. The proficient servicing is recommended if there are problems with the Fuel Level Sensor.

Toyota Matrix Fuel Level Sensor Parts and Q&A

Fuel Gauge Sending Unit
83320-02010
Q: How to install the Fuel Level Sensor RH assembly on Toyota Matrix?
A:
The 4WD fuel level sensor gauge RH assembly installation requires using 5 bolts to attach it to the fuel tank with 1.5 Nm (15 kgf-cm, 13 in-lbf) torque then connecting the fuel level sensor gauge connector. You should position the 4WD fuel level sensor gauge assembly downward and avoid contact between the wire harness and avoid deforming the fuel level sensor gauge arm. The 2WD fuel level sensor gauge assembly must also be slid down before connecting its connector and verifying that the fuel level sensor gauge arm holds a direct position. The following step requires the installation of the fuel suction tube assembly to the fuel tank assembly. Check for fuel leaking while connecting the cable to the negative terminal of the battery. For the 4WD installation finish with the No. 2 rear floor service hole cover.
Fuel Gauge Sending Unit, Driver Side
83320-02090
Q: How to replace a Fuel Level Sensor on Toyota Matrix?
A:
The first step to remove the fuel level sensor is draining fuel system pressure. The elimination of power starts by disconnecting the negative battery cable. You should detach the fuel suction tube assembly from the fuel tank assembly. The 4WD models require users to disconnect their fuel level sensor connector without damaging the wire harness before releasing the lock and drawing out the fuel level sensor assembly with attention to avoid damage between the fuel level sensor arm and tank. The 2WD model will require exactly the same service steps that the 4WD model uses. The No. 2 rear floor service hole cover should be removed for 4WD before disconnecting the fuel level sensor connector and removing all 5 bolts from the fuel level sensor RH assembly while taking care to protect the arm from bending.