Other Name: Computer, Engine Control; Engine Control Module
Replaces: 89661-02V51, 89661-02V52
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2010 Toyota Matrix | S, XRS | 4 Cyl 2.4 L GAS
| Page 1 of 3 |Next >
1-20 of 41 Results
Toyota Matrix Engine Control Module
If you're thinking about purchasing OEM parts for your Toyota Matrix, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Matrix Engine Control Module at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.
Q: How to replace the Engine Control Module (ECM) on Toyota Matrix?
A: To change the Engine Control Module (ECM), one must disconnect the battery, remove the glove compartment door and pull out the ECM by ripping off clips and connectors. Install the new ECM and brackets, reconnect and reinstall the glove compartment. Lastly, reconnect battery and VIN register.
Q: How to remove the Engine Control Module (ECM) on Toyota Matrix?
A: The 2AZ-FE engine requires disconnection of the negative battery terminal to remove the Engine Control Module (ECM), then the engine cover, air cleaner cap, and case should be removed. Unscrew the ECM connectors and make them clean. Lastly, take out the three bolts and four screws that are holding the ECM and brackets.