The first step to replace the headlight dimmer switch requires the front wheels should face forward while you disconnect the negative battery cable terminal for at least 90 seconds to disable SRS functions. The technician must start by eliminating the lower No. 3
Steering Wheel cover and afterward remove the lower No. 2 steering wheel cover and finally take off the steering pad. Operations start with removing the steering wheel assembly followed by the center instrument cluster finish panel sub-assembly and the instrument cluster finish panel sub-assembly. The technician must remove the meter hood sub-assembly together with the lower instrument panel finish panel assembly and the shift lever knob sub-assembly for manual and automatic transaxles. After removing the center instrument cluster finish panel assembly for both transaxles and both front upper console box, the No. 2 switch hole base, and the console box carpet need to be taken out. The service procedure continues by removing both 2WD and 4WD front console box assemblies in addition to front No. 1 and No. 2 console box inserts and lower center instrument panel finish panels belonging to both transaxle types. Remove the No. 1 switch hole base together with the lower instrument panel finish panel sub-assembly and the lower steering column cover and the upper steering column cover. The windshield
Wiper Switch assembly and spiral cable with
Steering Angle Sensor need removal. To complete the removal disconnect the connector then free the clamp before taking out the headlight dimmer switch assembly.