How to replace the cruise control servo assembly on Toyota Matrix?

You need to begin by removing the cruise control actuator cover through the disconnection of its two claws. The double nut needs loosening to separate the accelerator control cable assembly from the rest of the system. You must remove the screw to split the accelerator auto drive cable assembly from the rest. Next disconnect the connector while removing the 2 bolts that allow you to take out the cruise control actuator assembly with a bolt torque requirement of 6.0 N.m (60 kgf.cm, 52 in.lbf).

OEM Toyota Matrix Cruise Control Servo

Cruise Control Servo Speed

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Cruise Control Servo found

View related parts
Toyota Matrix Actuator
Part Number: 88200-02030
$873.63 MSRP: $1280.31
You Save: $406.68 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Cruise Control; Cruise Control Actuator; Cruise Control Servo
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2007 Toyota Matrix | Base, XR, XRS | 4 Cyl 1.8 L GAS

Toyota Matrix Cruise Control Servo

Choose genuine Cruise Control Servo that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Cruise Control Servo for your Toyota Matrix? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Matrix parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

Toyota Matrix Cruise Control Servo Parts and Q&A

Actuator
88200-02030
Q: How to replace the cruise control servo assembly on Toyota Matrix?
A:
You need to begin by removing the cruise control actuator cover through the disconnection of its two claws. The double nut needs loosening to separate the accelerator control cable assembly from the rest of the system. You must remove the screw to split the accelerator auto drive cable assembly from the rest. Next disconnect the connector while removing the 2 bolts that allow you to take out the cruise control actuator assembly with a bolt torque requirement of 6.0 N.m (60 kgf.cm, 52 in.lbf).