How to remove the Steering Angle Sensor on Toyota Land Cruiser?

The process of removing the Steering Angle Sensor requires the front wheel alignment in straight position with a negative battery terminal cable disconnect to disable Autoaway/Return feature by adjusting customize parameters before recording current settings for later reinstallation. Once the engine switch (IG) is activated to extend the steering column fully, users should lower it using the tilt and telescopic switch then turn off the engine before letting the cable disconnect from the negative terminal and wait at least 90 seconds to disable the SRS system. Remove the components from the steering wheel assembly by starting with LOWER NO. 2 STEERING WHEEL COVER and ending with UPPER STEERING COLUMN COVER. The SPIRAL CABLE SUB-ASSEMBLY must be removed first before the operator can detach six claws which permit removal of the STEERING ANGLE SENSOR.

OEM Toyota Land Cruiser Steering Angle Sensor

Steering Column Angle Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Steering Angle Sensors found

View related parts
Toyota Land Cruiser Angle Sensor
Part Number: 89245-52030
$341.62 MSRP: $500.65
You Save: $159.03 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Steering; Steering Wheel Position Sensor; Steering Wheel Speed Sensor; Steering Angle Sensor; Steering Sensor Assembly; Sensor
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2011 Toyota Land Cruiser | Base | 8 Cyl 5.7 L GAS
View related parts
Toyota Land Cruiser Sensor, Steering
Part Number: 89245-30070
$301.49 MSRP: $430.46
You Save: $128.97 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Steering Wheel Speed Sensor
- Manufacturer Note: STEERING-WITH(POWER STEERING & VGRS)
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2013-2015 Toyota Land Cruiser | Base | 8 Cyl 5.7 L GAS
View related parts
Toyota Land Cruiser Position Sensor
Part Number: 89245-60010
$340.52 MSRP: $486.18
You Save: $145.66 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Steering; Steering Wheel Speed Sensor; Steering Angle Sensor; Sensor; Sensor, Steering Position
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2002 Toyota Land Cruiser | Base | 8 Cyl 4.7 L GAS
View related parts
Toyota Land Cruiser Sensor, Steering
Part Number: 8924B-33020
$378.62 MSRP: $554.88
You Save: $176.26 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Steering W/Lo; Steering Wheel Speed Sensor
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2016-2020 Toyota Land Cruiser | Base, Heritage Edition | 8 Cyl 5.7 L GAS
View related parts
Toyota Land Cruiser Position Sensor
Part Number: 89245-33010
$419.83 MSRP: $615.26
You Save: $195.43 (32%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Steering; Steering Wheel Position Sensor; Steering Wheel Speed Sensor; Steering Angle Sensor; Angle Sensor; Steering Sensor Assembly; Sensor
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2007 Toyota Land Cruiser | Base | 8 Cyl 4.7 L GAS

Toyota Land Cruiser Steering Angle Sensor

If you're thinking about purchasing OEM parts for your Toyota Land Cruiser, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Land Cruiser Steering Angle Sensor at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Toyota Land Cruiser Steering Angle Sensor Parts Questions & Experts Answers

Angle Sensor
89245-52030
Q: How to remove the Steering Angle Sensor on Toyota Land Cruiser?
A: The process of removing the Steering Angle Sensor requires the front wheel alignment in straight position with a negative battery terminal cable disconnect to disable Autoaway/Return feature by adjusting customize parameters before recording current settings for later reinstallation. Once the engine switch (IG) is activated to extend the steering column fully, users should lower it using the tilt and telescopic switch then turn off the engine before letting the cable disconnect from the negative terminal and wait at least 90 seconds to disable the SRS system. Remove the components from the Steering Wheel assembly by starting with LOWER NO. 2 STEERING WHEEL COVER and ending with UPPER STEERING COLUMN COVER. The SPIRAL CABLE SUB-ASSEMBLY must be removed first before the operator can detach six claws which permit removal of the STEERING ANGLE SENSOR.